3408 & 3408B DIESEL TRUCK ENGINE Caterpillar

Fuel Filter Base


(1) Stud (two) used when filter base is installed high on the inlet manifold. Install stud so end of stud extends above surface of manifold boss to a dimension of ... 24.3 ± 1.5 mm (.96 ± .06 in.)

(2) Put 9S3265 Retaining Compound on the tapered end of stud to a distance of ... 7.6 mm (.30 in.)

(3) Sealing surface of stud.

NOTE: Do not damage this surface.

(4) Distance from sealing surface of base to end of stud ... 24.6 ± 1.3 mm (.97 ± .05 in.)

(5) Torque for stud ... 70 ± 15 N·m (50 ± 11 lb. ft.)

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.