SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT Caterpillar


8 Dismantling

Usage:

8.1 Introduction

In this chapter the procedure of dismantling the gearbox is described. It is mandatory to observe the safety notes. A gearbox mounting description is given in Chapter 4.


The plant has been taken out of service.

* Make sure reliable measures are taken to prevent the plant from being activated inadvertently.
* Make sure the crane carrying capacity is adequate for gearbox lifting.


Safeguard the gearbox against uncontrolled movements, e.g. sliding.

* Avoid heavy blows when dismantling the equipment.
* Make sure that axial forces are not exerted.

8.2 Dismantling Work to be Performed

Drain the oil from the gearbox.

For this purpose use suitable containers.


Any oil spillage must be collected in suitable containers.


For gearbox handling make sure that the carrying capacity of the crane is sufficient.

* Use approved handling elements only.
* Attach the gearbox carefully to the lifting hook.

Tighten the lifting straps or ropes without lifting up the gearbox.


Make sure the gearbox is not canted.

Disconnect the hydraulic motor from the supply system.

Close off the hydraulic lines by means of plugs.


Make sure that no dirt or foreign bodies are allowed to enter the hydraulic system.

Disconnect the brake release line.

Close off the brake release port by means of a plug.


Make sure that no dirt or foreign bodies are allowed to enter the brake release port.

Remove the fastening screws of the gearbox flange.

The gearbox is now suspended from the crane.

Move the gearbox carefully out of the bogie frame and lay it down.

Caterpillar Information System:

SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT 7. Maintenance
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT 5. Commissioning
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT 4. Mounting
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT 3. Handling / Storage
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT 2. Product Description
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT 1. Preliminary Notes
1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 L + S GFT 060T3.9139 with Disconnect
1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 E. Spare Parts Lists
1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 D. Drawings
1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 Installation Notes for Axial Piston Units
1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 C. Attachment Parts
1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 B. Lube Oils
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT 9 Disconnect Mechanism
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT 10. Spare Parts Ordering
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT A. Addresses
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT B. Lube Oils
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT C. Attachment Parts
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT Installation Notes for Axial Piston Units
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT Drawings
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT GFT 60 ASSEMBLY INSTRUCTIONS
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT Standard Bolt Tightening Torques For Unlubricated Standard Threads
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT Parts Lists
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT L + S GFT 060T3.9177 with Disconnect
1C7993 PROPEL DRIVES-UNDERCARRIAGES 9Q5718 9Q5723 9Q5724 9Q5 1. Preliminary Notes
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.