SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT Caterpillar


5. Commissioning

Usage:

5.1 Introduction

This chapter describes the course of action to be followed when taking the gearbox into service. The respective notes on safety shall be duly observed.

5.2 Commissioning Activities


In case of emergency actuate EMERGENCY-OFF.

* Do not touch any rotating parts


When filling the gearbox take care that lubricants are not allowed to pollute the environment.

Fill the gearbox with clean oil as specified under the heading lubrication.

At first oil fill, actual oil volume and specified oil volume may vary due to preservation oil remains in the gearbox.


Ensure that no dirt or other contaminants are allowed to enter the gearbox.


A list of oils approved by L+S is given in Appendix B.

Check the oil level before starting up the gearbox. The correct oil level can be ascertained through the opening in the gearbox housing, when the gearbox is not operating.

The maximum operating temperature is 90°C.

When the operating temperature has been reached, check the entire gearbox for tightness.

This check can be performed while the gearbox is running.


The following checks must only be carried out when the gearbox is at a standstill.

After 10 hours of full load operation check all fastening screws and boltings for tightness.

Check whether all bolts of the gearbox are tight as required.

The first oil change is to be made after approx. 150 operating hours.

Further oil changes are to be made at intervals as per the Maintenance Schedule given in Chapter 7.3.

Caterpillar Information System:

SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT 4. Mounting
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT 3. Handling / Storage
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT 2. Product Description
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT 1. Preliminary Notes
1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 L + S GFT 060T3.9139 with Disconnect
1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 E. Spare Parts Lists
1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 D. Drawings
1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 Installation Notes for Axial Piston Units
1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 C. Attachment Parts
1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 B. Lube Oils
1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 A. Addresses
1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 10. Spare Parts Ordering
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT 7. Maintenance
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT 8 Dismantling
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT 9 Disconnect Mechanism
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT 10. Spare Parts Ordering
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT A. Addresses
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT B. Lube Oils
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT C. Attachment Parts
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT Installation Notes for Axial Piston Units
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT Drawings
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT GFT 60 ASSEMBLY INSTRUCTIONS
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT Standard Bolt Tightening Torques For Unlubricated Standard Threads
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT Parts Lists
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.