1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 Caterpillar


8. Dismantling

Usage:

8.1 Introduction

In this chapter the procedure of dismantling the gearbox is described. It is mandatory to observe the safety notes. A gearbox mounting description is given in Chapter 4.


The plant has been taken out of service.

* Make sure reliable measures are taken to prevent the plant from being activated inadvertently.
* Make sure the crane carrying capacity is adequate for gearbox lifting.


Safeguard the gearbox against uncontrolled movements, e.g. sliding.

* Avoid heavy blows when dismantling the equipment.
* Make sure that axial forces are not exerted.

8.2 Dismantling Work to be Performed

Drain the oil from the gearbox.

For this purpose use suitable containers.


Any oil spillage must be collected in suitable containers.


For gearbox handling make sure that the carrying capacity of the crane is sufficient.

* Use approved handling elements only.
* Attach the gearbox carefully to the lifting hook.

Tighten the lifting straps or ropes without lifting up the gearbox.


Make sure the gearbox is not canted.

Disconnect the hydraulic motor from the supply system.

Close off the hydraulic lines by means of plugs.


Make sure that no dirt or foreign bodies are allowed to enter the hydraulic system.

Disconnect the brake release line.

Close off the brake release port by means of a plug.


Make sure that no dirt or foreign bodies are allowed to enter the brake release port.

Remove the fastening screws of the gearbox flange.

The gearbox is now suspended from the crane.

Move the gearbox carefully out of the bogie frame and lay it down.

Caterpillar Information System:

1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 7. Maintenance
1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 5. Commissioning
1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 4. Mounting
1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 3. Handling / Storage
1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 2. Product Description
1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 1. Preliminary Notes
SUPPLEMENTARY SERVICE INFORMATION FOR 1C-7183 LOHMANN & STOL Illustration
SUPPLEMENTARY SERVICE INFORMATION FOR 1C-7183 LOHMANN & STOL Removing The Shaft Nut From The Drive
SUPPLEMENTARY SERVICE INFORMATION FOR 1C-7183 LOHMANN & STOL Addresses
SUPPLEMENTARY SERVICE INFORMATION FOR 1C-7183 LOHMANN & STOL Spare Parts Lists
SUPPLEMENTARY SERVICE INFORMATION FOR 1C-7183 LOHMANN & STOL Drawings
SUPPLEMENTARY SERVICE INFORMATION FOR 1C-7183 LOHMANN & STOL Installation notes for axial piston units
1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 9. Disconnect Mechanism
1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 10. Spare Parts Ordering
1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 A. Addresses
1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 B. Lube Oils
1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 C. Attachment Parts
1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 Installation Notes for Axial Piston Units
1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 D. Drawings
1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 E. Spare Parts Lists
1C9865 PROPEL DRIVES FOR UNDERCARRIAGES 1C9614 6Z7749 9Q5034 L + S GFT 060T3.9139 with Disconnect
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT 1. Preliminary Notes
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT 2. Product Description
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT 3. Handling / Storage
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.