SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Caterpillar


Dismantling

Usage:

Introduction

In this chapter the procedure of dismantling the gearbox is described. It is mandatory to observe the safety notes. A gearbox mounting description is given in Chapter 4.


The plant has been taken out of service.

* Make sure reliable measures are taken to prevent the plant from being activated inadvertently.
* Make sure the crane capacity is adequate for gearbox lifting.


Safeguard the gearbox against uncontrolled movements, e.g. sliding.

* Avoid heavy blows when dismantling the equipment.
* Make sure that axial forces are not exerted.

Dismantling Work to be Performed

Drain the oil from the gearbox. For this purpose use suitable containers.


Any oil spillage must be collected in suitable containers.


For gearbox handling make sure that the carrying capacity or the crane is sufficient.

* Use approved handling elements only.
* Attach the gearbox carefully to the lifting hook.

Tighten the lifting straps or ropes without lifting up the gearbox.


Make sure the gearbox is not canted.

Disconnect the hydraulic motor from the supply system.

Close off the hydraulic lines by means of plugs.


Make sure that no dirt or foreign bodies are allowed to enter the hydraulic system.

------ WARNING! ------


Caution! Depending on the gearbox design, the coupler can be disengaged from the inner gearing of the disks when disassembling the hydraulic motor! Make sure to observe its correct installation position when mounting the coupler. See spare part drawing 0/6167/1285/0.

--------WARNING!------

Disconnect the brake release line.

Close off the brake release port by means of a plug.


Make sure that no dirt or foreign bodies are allowed to enter the brake release port.

Remove the fastening screws of the gearbox flange.

The gearbox is now suspended from the crane.

Move the gearbox carefully out of the bogie frame and lay it down.

Caterpillar Information System:

SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Maintenance
SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Commissioning
SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Mounting
SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Handling / Storage
SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Product Description
SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Preliminary Notes
Product support program for reworking lines gp - water 279-0117 on power module aftercoolers for certain PM3516B Engines Product support program for reworking lines gp - water 279-0117 on power module aftercoolers for certain PM3516B Engines
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R8849 CYLINDER HEADS AND CERTAIN 0R7907 LONG BLOCKS FROM DEALERS PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R8849 CYLINDER HEADS AND CERTAIN 0R7907 LONG BLOCKS FROM DEALERS PARTS STOCK
Product Improvement Program for removing 9Y-0916 rectifiers and associated heat sink assemblies from dealer inventory. Product Improvement Program for removing 9Y-0916 rectifiers and associated heat sink assemblies from dealer inventory.
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING PERFORMANCE IMPROVMENT SOFTWARE FOR CERTAIN 3516B GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING PERFORMANCE IMPROVMENT SOFTWARE FOR CERTAIN 3516B GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR FLASHING SOFTWARE FOR CERTAIN C11 AND C13 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR FLASHING SOFTWARE FOR CERTAIN C11 AND C13 TRUCK ENGINES
SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Spare Parts Ordering
SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Addresses
SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Lube Oil Recommendations - CLP220
SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Attachment Parts
SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Drawings
SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Parts Lists
SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO L+S Propel Drive
SUPPLEMENTARY SERVICE INFORMATION FOR 185-1894 LOHMANN & STO Preliminary Notes
SUPPLEMENTARY SERVICE INFORMATION FOR 185-1894 LOHMANN & STO Product Description
SUPPLEMENTARY SERVICE INFORMATION FOR 185-1894 LOHMANN & STO Handling / Storage
SUPPLEMENTARY SERVICE INFORMATION FOR 185-1894 LOHMANN & STO Mounting
SUPPLEMENTARY SERVICE INFORMATION FOR 185-1894 LOHMANN & STO Commissioning
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.