SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Caterpillar


Commissioning

Usage:

Introduction

This chapter describes the course of action to be followed when taking the gearbox into service. The respective notes on safety shall be duly observed.

Commissioning Activities


In case of emergency actuate EMERGENCY-OFF.

* Do not touch any rotating parts


When filling the gearbox take care that lubricants are not allowed to pollute the environment.

Fill the gearbox with clean oil as specified under the heading lubrication. At first fill, actual oil volume and specified oil volume may vary due to preservation oil remains in the gearbox.


Ensure that no dirt or other contaminants are allowed to enter the gearbox.


A list of oils approved by L+S is given in Appendix B.

Fill in oil through the screw indicated in the instruction drawing.

Check the oil level before starting up the gearbox. The correct oil level can be ascertained through the opening in the gearbox housing, when the gearbox is not operating.

The maximum operating temperature is 90°C.

When the operating temperature has been reached, check the entire gearbox for tightness. This check can be performed while the gearbox is running.


The following checks must only be carried out when the gearbox is at a standstill.

After 10 hours of full load operation check all fastening screws and boltings for tightness.

Check whether all bolts at the gearbox are tight as required.

The first oil change is to be made after approx. 150 operating hours.

Further oil changes are to be made at the intervals as per the Maintenance Schedule given in Chapter 7.3.

Caterpillar Information System:

SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Mounting
SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Handling / Storage
SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Product Description
SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Preliminary Notes
Product support program for reworking lines gp - water 279-0117 on power module aftercoolers for certain PM3516B Engines Product support program for reworking lines gp - water 279-0117 on power module aftercoolers for certain PM3516B Engines
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R8849 CYLINDER HEADS AND CERTAIN 0R7907 LONG BLOCKS FROM DEALERS PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 0R8849 CYLINDER HEADS AND CERTAIN 0R7907 LONG BLOCKS FROM DEALERS PARTS STOCK
Product Improvement Program for removing 9Y-0916 rectifiers and associated heat sink assemblies from dealer inventory. Product Improvement Program for removing 9Y-0916 rectifiers and associated heat sink assemblies from dealer inventory.
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING PERFORMANCE IMPROVMENT SOFTWARE FOR CERTAIN 3516B GENERATOR SETS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING PERFORMANCE IMPROVMENT SOFTWARE FOR CERTAIN 3516B GENERATOR SETS
PRODUCT SUPPORT PROGRAM FOR FLASHING SOFTWARE FOR CERTAIN C11 AND C13 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR FLASHING SOFTWARE FOR CERTAIN C11 AND C13 TRUCK ENGINES
Product Supprot Program for Installation of an inner shield to the exhaust manifold for certain 3500B Engines Product Supprot Program for Installation of an inner shield to the exhaust manifold for certain 3500B Engines
PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE FUEL COOLER ON CERTAIN C15 MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE FUEL COOLER ON CERTAIN C15 MARINE ENGINES
SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Maintenance
SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Dismantling
SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Spare Parts Ordering
SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Addresses
SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Lube Oil Recommendations - CLP220
SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Attachment Parts
SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Drawings
SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO Parts Lists
SUPPLEMENTARY SERVICE INFORMATION FOR 173-4600 LOHMANN & STO L+S Propel Drive
SUPPLEMENTARY SERVICE INFORMATION FOR 185-1894 LOHMANN & STO Preliminary Notes
SUPPLEMENTARY SERVICE INFORMATION FOR 185-1894 LOHMANN & STO Product Description
SUPPLEMENTARY SERVICE INFORMATION FOR 185-1894 LOHMANN & STO Handling / Storage
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.