PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 3126E ENGINES
Usage:
SEBE8893
August 31, 2004
O-219
Show/hide table
| Priority |
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE INJECTION ACTUATION PRESSURE SENSOR ON CERTAIN 3126E ENGINES |
|
| 7755, 1925 |
PI30676
|
|
NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
Show/hide table
COMPLETION DATE |
TERMINATION DATE |
| February 28, 2005 | August 31, 2005 |
PROBLEM
Replace the injection actuation pressure sensor certain 3126E engines. The old sensor may leak oil.AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 3126E |
|
PARTS NEEDED
Show/hide table
Qty |
Part Number | Description |
| 1 |
|
SENSOR GP-PR |
ACTION REQUIRED
Remove the 194-6726 Pressure Sensor and replace it with part number 224-4536 Pressure Sensor.OWNER NOTIFICATION
U.S. and Canadian owners will receive the attached Owner Notification.SERVICE CLAIM ALLOWANCES
Show/hide table
|
|
|
|
|||
|
Labor Hrs |
|
Labor Hrs |
|
Labor Hrs |
|
|
|
|
|
|
|
|
NOTE: U.S. and Canadian Dealers Only - Eligible dealers may enter a Type 2 SIMS Report |
|||||
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.MAKE EVERY EFFORT TO COMPLETE THIS PROGRAM AS SOON AS POSSIBLE.
Attach. (Owner Notification)
COPY OF OWNER NOTIFICATION FOR U.S. AND CANADIAN OWNERS
XYZ Corporation3240 Arrow Drive
Anywhere, YZ 99999
PRIORITY - THE INJECTION ACTUATION PRESSURE SENSOR NEEDS TO BE REPLACED.
MODELS INVOLVED - CERTAIN 3126E ENGINES
Dear Caterpillar Product Owner:
A new injection actuation pressure sensor needs to be installed on the products listed below. The current sensor may leak oil. You will not be charged for the service performed.
Contact your local Caterpillar dealer immediately to schedule this service. The dealer will advise you of the time required to complete this service. Please refer the dealer to their Service Letter dated August 31, 2004 when scheduling this service.
We regret the inconvenience this may cause you, but urge you to have this service performed as soon as possible to prevent unscheduled downtime.
Caterpillar Inc.
Identification #(s)
Attached to August 31, 2004 Service Letter
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTOR IN THE ALTERNATOR ON CERTAIN 3116 AND 3126E TRUCK ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTOR IN THE ALTERNATOR ON CERTAIN 3116 AND 3126E TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPAIRING THE FUEL CONTROL ASSEMBLY ON SOME 3161 GOVERNORS PRODUCT IMPROVEMENT PROGRAM FOR REPAIRING THE FUEL CONTROL ASSEMBLY ON SOME 3161 GOVERNORS
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE FILES ON CERTAIN C10, C12, C15, AND C16 INDUSTRIAL ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE FILES ON CERTAIN C10, C12, C15, AND C16 INDUSTRIAL ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE TURBO OIL SUPPLY LINES ON CERTAIN C15 ON-HIGHWAY TRUCK ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE TURBO OIL SUPPLY LINES ON CERTAIN C15 ON-HIGHWAY TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING A CONTROL GROUP AND RECALIBRATING THE RACK POSITION SENSOR ON CERTAIN 3512 ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING A CONTROL GROUP AND RECALIBRATING THE RACK POSITION SENSOR ON CERTAIN 3512 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLATION OF A CHECK VALVE KIT ON CERTAIN C7 AND C9 ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSTALLATION OF A CHECK VALVE KIT ON CERTAIN C7 AND C9 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARMS ON CERTAIN C15 TRUCK ENGINES EQUIPPED WITH COMPRESSION BRAKES PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARMS ON CERTAIN C15 TRUCK ENGINES EQUIPPED WITH COMPRESSION BRAKES
PRODUCT SUPPORT PROGRAM FOR REPAIRING A BROKEN CRANKSHAFT ON CERTAIN 3406E TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR REPAIRING A BROKEN CRANKSHAFT ON CERTAIN 3406E TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN 3500B ENGINES PRODUCT SUPPORT PROGRAM FOR UPDATING SOFTWARE ON CERTAIN 3500B ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 225-8577, 225-8578, AND 225-8579 BEARINGS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 225-8577, 225-8578, AND 225-8579 BEARINGS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING THE WEAR BARS IN THE 4Z6938 LINER GROUP OF CERTAIN MSD LL BODIES USED ON 793 OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE WEAR BARS IN THE 4Z6938 LINER GROUP OF CERTAIN MSD LL BODIES USED ON 793 OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR EXCHANGING THE RUBBER BOOTS ON THE ALTERNATOR WIRING HARNESS ON CERTAIN 3508B, 3512B, AND 3516B ENGINES PRODUCT SUPPORT PROGRAM FOR EXCHANGING THE RUBBER BOOTS ON THE ALTERNATOR WIRING HARNESS ON CERTAIN 3508B, 3512B, AND 3516B ENGINES
PRODUCT SUPPORT PROGRAM FOR IMPROVING ACCELERATION ON 525HP C13 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR IMPROVING ACCELERATION ON 525HP C13 TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR CORRECTING THE BOLT HOLE ALIGNMENT ON THE PADS OF THE TRUCK BODIES FOR CERTAIN 773 AND 775 OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR CORRECTING THE BOLT HOLE ALIGNMENT ON THE PADS OF THE TRUCK BODIES FOR CERTAIN 773 AND 775 OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CONVERTER MUFFLER HANGER CLAMPS ON CERTAIN 3126E TRUCK ENGINES PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE CONVERTER MUFFLER HANGER CLAMPS ON CERTAIN 3126E TRUCK ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR PREVENTING POSSIBLE FUEL OR OIL LINE FAILURES ON CERTAIN C12 MARINE ENGINES PRODUCT IMPROVEMENT PROGRAM FOR PREVENTING POSSIBLE FUEL OR OIL LINE FAILURES ON CERTAIN C12 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING EXHAUST ROCKER ARMS ON CERTAIN C15 AND C16 TRUCK ENGINES EQUIPPED WITH JACOBS 340D COMPRESSION BRAKES PRODUCT SUPPORT PROGRAM FOR REPLACING EXHAUST ROCKER ARMS ON CERTAIN C15 AND C16 TRUCK ENGINES EQUIPPED WITH JACOBS 340D COMPRESSION BRAKES
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 185-6134 STUDS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 185-6134 STUDS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 9M6193 CARTRIDGE SPRINGS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING 9M6193 CARTRIDGE SPRINGS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW FLASH FILES FOR CERTAIN C15 TRUCK ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING NEW FLASH FILES FOR CERTAIN C15 TRUCK ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HIGH PRESSURE OIL PUMP AND / OR REFLASHING SOFTWARE ON CERTAIN C9 ENGINES IN RV APPLICATIONS PRODUCT SUPPORT PROGRAM FOR REPLACING THE HIGH PRESSURE OIL PUMP AND / OR REFLASHING SOFTWARE ON CERTAIN C9 ENGINES IN RV APPLICATIONS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL PRESSURE SENSOR ON CERTAIN C7 MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING THE FUEL PRESSURE SENSOR ON CERTAIN C7 MARINE ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING VIBRATION ISOLATORS FOR POWER DISTIBUTION PANELS ON CERTAIN 3500B SERIES II MARINE ENGINES PRODUCT SUPPORT PROGRAM FOR INSTALLING VIBRATION ISOLATORS FOR POWER DISTIBUTION PANELS ON CERTAIN 3500B SERIES II MARINE ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR SAMPLING THE ENGINE OIL AND IF NECESSARY REPLACING THE IDLER GEAR ASSEMBLY ON 3054C ENGINES INSTALLED IN CERTAIN ASV RC85 AND RC100 MACHINES PRODUCT IMPROVEMENT PROGRAM FOR SAMPLING THE ENGINE OIL AND IF NECESSARY REPLACING THE IDLER GEAR ASSEMBLY ON 3054C ENGINES INSTALLED IN CERTAIN ASV RC85 AND RC100 MACHINES