Product Support Program For Replacing Pivot Shaft On Certain D6H Track-type Tractors Caterpillar


Product Support Program For Replacing Pivot Shaft On Certain D6H Track-type Tractors

Usage:

@media screen { div.divFooter { display: none; } } @media print { div.divFooter { position: fixed; bottom: 0; right: 0; } }
Caterpillar: Confidential Yellow

NOTE: This Program can be administered either before or after a failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS4689" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and use " T" as the SIMS Description Code. If administered after failure, use "96" as the Warranty Claim Description Code and use " Z" as the SIMS Description Code.

NOTE: This Revised Service Letter replaces the February 26, 1992 Service Letter. A change was made to the Termination Date.

Termination Date

February 28, 1994

Problem

The pivot shaft on certain D6H Track-Type Tractors may be wearing excessively at the journal of the larger pressed in bearing.

Affected Product
Model & Identification Number

D6H (6CF800-4017, 6CF4019-4023, 6CF4025-4030, 6CF4032-4064, 6CF4066-4069, 6CF4073-4083, 6CF4089, 6CF4095-4097; 4LG1038-4165, 4LG4167-4177; 1FJ4084-4087)

Parts Needed

2 - 5G9839 Shaft Assembly
2 - 5G9842 Seal
2 - 7J1333 Bearing
2 - 7P8370 Bearing
2 - 6Y9249 Plate

Action Required

Remove the existing pivot shaft and replace with new 5G9839 Pivot Shaft Assembly and related parts.

Service Claim Allowances

NOTE: This is a 12-hour job.

Parts Disposition

Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.

Caterpillar Information System:

New Sun Gears Need To Be Installed In The Final Drives Of Certain 615C Tractors New Sun Gears Need To Be Installed In The Final Drives Of Certain 615C Tractors
The Main Frame On Certain D6E Tractors Needs To Be Inspected For Cracks And Reworked If Necessary The Main Frame On Certain D6E Tractors Needs To Be Inspected For Cracks And Reworked If Necessary
Product Support Program For Replacing Pivot Shaft On Certain 963 Track-Type Loaders Product Support Program For Replacing Pivot Shaft On Certain 963 Track-Type Loaders
Product Support Program For Replacing Pivot Shaft On Certain 973 Track-Type Loaders Product Support Program For Replacing Pivot Shaft On Certain 973 Track-Type Loaders
PARTS STOCK ACTION ONLY - 3T3133 SWITCH ASSEMBLIES NEED TO BE REMOVED FROM PARTS STOCK - PI7275 - MAILED US AND CANADA, CACO, CO FA, BRAZIL, CFEL, COSA PARTS STOCK ACTION ONLY - 3T3133 SWITCH ASSEMBLIES NEED TO BE REMOVED FROM PARTS STOCK - PI7275 - MAILED US AND CANADA, CACO, CO FA, BRAZIL, CFEL, COSA
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock Certain New And Remanufactured Brake Bands Need To Be Removed From Parts Stock
Product Support Program For Updating Screed Burners On Certain AP-800, AP-800B, AP-1050, And AP-1200 Asphalt Pavers Product Support Program For Updating Screed Burners On Certain AP-800, AP-800B, AP-1050, And AP-1200 Asphalt Pavers
The Seat Back Recliner Bracket Needs To Be Updated On Certain D9N, D10N, D11N, And 772B Tractors; 769C And 773B Trucks; And 950F And 966F Wheel Loaders The Seat Back Recliner Bracket Needs To Be Updated On Certain D9N, D10N, D11N, And 772B Tractors; 769C And 773B Trucks; And 950F And 966F Wheel Loaders
Product Support Program For Installing the 5G8846 Idler Scraper Group On Certain D4H Tractors and D4H Track Skidders Product Support Program For Installing the 5G8846 Idler Scraper Group On Certain D4H Tractors and D4H Track Skidders
SERVICE LETTER SUPPLEMENT FOR JUNE 10, 1989 SL (REVISED 10/91) - PSP FOR EXCESSIVE AIR SIDE PLUGGING OF FOLDED CORE RADIATORS IN CERTAIN IT18, IT18B, 1T28, 1T28B TOOLCARRIERS; 916, 926/926E, G926, 936/936E LOADERS - PS0391 - MAILED US AND CANADA , CA SERVICE LETTER SUPPLEMENT FOR JUNE 10, 1989 SL (REVISED 10/91) - PSP FOR EXCESSIVE AIR SIDE PLUGGING OF FOLDED CORE RADIATORS IN CERTAIN IT18, IT18B, 1T28, 1T28B TOOLCARRIERS; 916, 926/926E, G926, 936/936E LOADERS - PS0391 - MAILED US AND CANADA , CA
Product Support Program For Replacing Tilt Cylinder Rods On Certain 963 Track Loaders Product Support Program For Replacing Tilt Cylinder Rods On Certain 963 Track Loaders
New Control Groups And Seals Need To Be Installed For The Computerized Monitoring System On Certain 950F And 966F Wheel Loaders New Control Groups And Seals Need To Be Installed For The Computerized Monitoring System On Certain 950F And 966F Wheel Loaders
Product Support Program For Repairing The Front Track Roller Frame On Certain D8N And D9N Tractors Product Support Program For Repairing The Front Track Roller Frame On Certain D8N And D9N Tractors
Product Support Program For Installing New Fuel Injection Line Groups On Certain D9N Tractors, 589 Pipelayers 631E Tractors, 637E Tractors, 657E Scrapers, 768C Tractors, 769C Trucks, 834B Tractors, And 988B Loaders Product Support Program For Installing New Fuel Injection Line Groups On Certain D9N Tractors, 589 Pipelayers 631E Tractors, 637E Tractors, 657E Scrapers, 768C Tractors, 769C Trucks, 834B Tractors, And 988B Loaders
Product Support Program For Installing New Fuel Injection Line Groups On Certain D9N Tractors, 589 Pipelayers 631E Tractors, 637E Tractors, 657E Scrapers, 768C Tractors, 769C Trucks, 834B Tractors, And 988B Loaders Product Support Program For Installing New Fuel Injection Line Groups On Certain D9N Tractors, 589 Pipelayers 631E Tractors, 637E Tractors, 657E Scrapers, 768C Tractors, 769C Trucks, 834B Tractors, And 988B Loaders
New Centering Springs Need To Be Installed In the Steering Metering Pump On Certain 916 Loaders And IT18B Toolcarriers New Centering Springs Need To Be Installed In the Steering Metering Pump On Certain 916 Loaders And IT18B Toolcarriers
Product Support Program For Installing New Fuel Injection Line Groups On Certain D10N Tractors; 651E And 657E Tractors; 772B Tractors; 773B Trucks; And 992C Loaders Product Support Program For Installing New Fuel Injection Line Groups On Certain D10N Tractors; 651E And 657E Tractors; 772B Tractors; 773B Trucks; And 992C Loaders
Product Support Program For Installing New Fuel Injection Line Groups On Certain D10N Tractors; 651E And 657E Tractors; 772B Tractors; 773B Trucks; And 992C Loaders Product Support Program For Installing New Fuel Injection Line Groups On Certain D10N Tractors; 651E And 657E Tractors; 772B Tractors; 773B Trucks; And 992C Loaders
Remanufactured Cylinder Heads Need To Be Removed From Parts Stock And Returned For Rework Remanufactured Cylinder Heads Need To Be Removed From Parts Stock And Returned For Rework
Product Support Program For Increasing The Brake Modulation On Certain 950F Wheel Loaders Product Support Program For Increasing The Brake Modulation On Certain 950F Wheel Loaders
New Hood Rear Mounts Need To Be Installed On Certain D5C Tractors New Hood Rear Mounts Need To Be Installed On Certain D5C Tractors
3S2708 Spring Pins Need To Be Removed From Parts Stock 3S2708 Spring Pins Need To Be Removed From Parts Stock
Product Support Program For Repairing Cracks Between Fuel Tank And Rear Frame Member On Certain 623E Scrapers Product Support Program For Repairing Cracks Between Fuel Tank And Rear Frame Member On Certain 623E Scrapers
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.