1982/09/22 Caterpillar


Improved Idler Pulley Assemblies For 3208 Engines

Usage:


3208 Industrial Engines

Description of Change: The above engines now have an improved idler pulley assembly (attachment). The new pulley assembly has two larger bearings and a larger shaft. The new pulley assembly will give a longer service life than the former assembly.

Adaptable To: The new 2W3181 Idler Pulley Assembly is a direct replacement for the former 9N779 Idler Pulley Assembly. The chart shows the parts in the new idler pulley that are serviced.


2W3181 Idler Pulley Assembly.

Caterpillar Information System:

1982/09/22 New Compression Ring Available For Control Of Excessive Oil Consumption
1982/09/22 New Rocker Arm Assemblies Used
1982/09/22 Service Life Of Slip Rings Can Be Extended
1982/09/22 Dial Bore Gauge And Size Setting Fixture Available
1982/09/22 Two Oil Change Kits Have Oil Filters, Cooling System Conditioner
1982/09/22 Improved Inlet And Exhaust Valves
1982/09/22 New Brass Bonnet, Bonnet Assembly Used In Heat Exchanger
1982/09/22 New Torque Specification For Fuel Injection Pump Bushing
1982/09/22 New Instruction Card Available For 6V87 Valve Stem Gauge
1982/09/22 Change Made To Installation Procedure For 3N5620 Service Disconnect Spacer Group
1982/09/22 Water Cooled Turbocharger Now Used
1982/09/22 Caterpillar-Built Industrial Engines Available In New Machines
1982/09/22 New Oil Additives Can Cause High Copper (Cu) Indications During S.O.S. Tests
1982/09/22 New Bearing Used In Air Starting Motor
1982/09/22 New Rear Support For Oil Cooler Is Thicker, Has Cast-In Spacers
1982/09/22 Metal Particles On Magnetic Pick-Up Can Permit Engine RPM To Vary; Move Pick-Up To A New Location
1982/09/22 New Tool Makes Installation Of Carbon Stop Seals Easier
1982/09/22 Reusability Of Camshaft Rollers And Roller Followers
1982/09/22 Improved Lubrication System
1982/10/20 Changes In Engine RPM; Governor Does Not Operate Correctly
1982/10/20 Service Information For Easier Use Of The 6V3100 Timing Indicator Group
1982/10/20 Indications From 6V3100 Timing Indicator Group Must Be Corrected For Some Applications
1982/10/20 Altronic III Ignition Systems Available
1982/10/20 Electrical System Voltage Must Be Limited To A Maximum Of 40 Volts With Woodward Model 2301 Governors
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.