Caterpillar-Built Industrial Engines Available In New Machines
Usage:
Caterpillar Industrial Engines are now available in several new machines made by Original Equipment Manufacturers. These new engine applications are shown in the chart.
Caterpillar Information System:
1982/09/22 New Fuel Injection Nozzle Assembly Gives More Constant Valve Opening Pressure
1982/09/22 Make Sure Generator Leads Do Not Move Against Frame
1982/09/22 Induction Bearing Heater Available
1982/08/25 New Hardened Gears Used In Engine Camshaft Assemblies And Accessory Drives
1982/08/25 Use Correct Torque To Prevent Broken Rocker Arm Shafts
1982/08/25 Different Pipe Plug In Turbocharger Turbine Housing Prevents Contact With Oil Filter
1982/08/25 Change Made To Fuel Nozzle Assembly; New Bleed Screw Used
1982/08/25 New Time Delay Conversion Groups Available
1982/08/25 New Main And Connecting Rod Bearings Have A Thicker Layer Of Lead-Tin Overlay (Surface Material)
1982/08/25 Wrong Water Separator Element Will Not Remove Water
1982/08/25 New Crankshaft Wear Sleeve For Engines With Lip-Type Seals
1982/08/25 Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge
1982/09/22 Water Cooled Turbocharger Now Used
1982/09/22 Change Made To Installation Procedure For 3N5620 Service Disconnect Spacer Group
1982/09/22 New Instruction Card Available For 6V87 Valve Stem Gauge
1982/09/22 New Torque Specification For Fuel Injection Pump Bushing
1982/09/22 New Brass Bonnet, Bonnet Assembly Used In Heat Exchanger
1982/09/22 Improved Inlet And Exhaust Valves
1982/09/22 Two Oil Change Kits Have Oil Filters, Cooling System Conditioner
1982/09/22 Dial Bore Gauge And Size Setting Fixture Available
1982/09/22 Service Life Of Slip Rings Can Be Extended
1982/09/22 New Rocker Arm Assemblies Used
1982/09/22 New Compression Ring Available For Control Of Excessive Oil Consumption
1982/09/22 Improved Idler Pulley Assemblies For 3208 Engines