1982/09/22 Caterpillar


New Fuel Injection Nozzle Assembly Gives More Constant Valve Opening Pressure

Usage:


3208 Industrial And Marine Engines

Description of Change: The above engines have an improved fuel injection nozzle assembly. The new nozzle assembly has increased clearance between the guide and the stem. The added clearance results in easier movement of the inside components, and prevents binding (seizure) of the components. The result is a more constant valve opening pressure (VOP).

The test specifications for the new nozzle assembly are the same as for the former nozzle assembly.

Adaptable To: The new 1W5829 Nozzle Assembly is a direct replacement for the former 9N3979 Nozzle Assembly which is canceled. It is not a replacement for the 9L6969 Nozzle Assembly which was used on engines before 1979. The new nozzle assembly is in effect with the engine serial numbers shown.

Caterpillar Information System:

1982/09/22 Make Sure Generator Leads Do Not Move Against Frame
1982/09/22 Induction Bearing Heater Available
1982/08/25 New Hardened Gears Used In Engine Camshaft Assemblies And Accessory Drives
1982/08/25 Use Correct Torque To Prevent Broken Rocker Arm Shafts
1982/08/25 Different Pipe Plug In Turbocharger Turbine Housing Prevents Contact With Oil Filter
1982/08/25 Change Made To Fuel Nozzle Assembly; New Bleed Screw Used
1982/08/25 New Time Delay Conversion Groups Available
1982/08/25 New Main And Connecting Rod Bearings Have A Thicker Layer Of Lead-Tin Overlay (Surface Material)
1982/08/25 Wrong Water Separator Element Will Not Remove Water
1982/08/25 New Crankshaft Wear Sleeve For Engines With Lip-Type Seals
1982/08/25 Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge
1982/08/25 Stronger Turbine Wheel Used In Turbocharger Shaft And Wheel Assemblies
1982/09/22 Caterpillar-Built Industrial Engines Available In New Machines
1982/09/22 Water Cooled Turbocharger Now Used
1982/09/22 Change Made To Installation Procedure For 3N5620 Service Disconnect Spacer Group
1982/09/22 New Instruction Card Available For 6V87 Valve Stem Gauge
1982/09/22 New Torque Specification For Fuel Injection Pump Bushing
1982/09/22 New Brass Bonnet, Bonnet Assembly Used In Heat Exchanger
1982/09/22 Improved Inlet And Exhaust Valves
1982/09/22 Two Oil Change Kits Have Oil Filters, Cooling System Conditioner
1982/09/22 Dial Bore Gauge And Size Setting Fixture Available
1982/09/22 Service Life Of Slip Rings Can Be Extended
1982/09/22 New Rocker Arm Assemblies Used
1982/09/22 New Compression Ring Available For Control Of Excessive Oil Consumption
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.