1982/08/25 Caterpillar


New Time Delay Conversion Groups Available

Usage:


3300 Series And 3400 Series Industrial, Marine And Generator Set Engines

Description of Change: New time delay conversion groups are available for use on the above engines.

The new electronic time delay has two electronic timers and a relay. It is used in place of the former oil pressure orifice timer.

Adaptable As: The 2W6384 Time Delay Conversion Group is for use on all 3300 Series Industrial, Marine, and Generator Set Engines. The 2W6386 Time Delay Conversion Group is for use on all 3400 Series Industrial, Marine and Generator Set Engines.

Special Instruction, Form No. SMHS8082 gives installation instructions and is sent with the time delay conversion group.

Caterpillar Information System:

1982/08/25 New Main And Connecting Rod Bearings Have A Thicker Layer Of Lead-Tin Overlay (Surface Material)
1982/08/25 Wrong Water Separator Element Will Not Remove Water
1982/08/25 New Crankshaft Wear Sleeve For Engines With Lip-Type Seals
1982/08/25 Excessive Oil Consumption: Check The Accuracy Of The Oil Level Gauge
1982/08/25 Stronger Turbine Wheel Used In Turbocharger Shaft And Wheel Assemblies
1982/08/25 Caterpillar-Built Industrial Engines Available In New Machines
1982/08/25 List Of Service Publications
1982/08/25 Repair Kit For The 5P9700 Hose Cutter Is Available
1982/08/25 New Gear Type Pump Primes Itself At Start-Up
1982/08/25 Oil Passage Plugs Are No Longer Installed In Crankshafts For Parts Service
1982/08/25 New Auxiliary Pump Group Operates At A Slower RPM
1982/08/25 Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems
1982/08/25 Change Made To Fuel Nozzle Assembly; New Bleed Screw Used
1982/08/25 Different Pipe Plug In Turbocharger Turbine Housing Prevents Contact With Oil Filter
1982/08/25 Use Correct Torque To Prevent Broken Rocker Arm Shafts
1982/08/25 New Hardened Gears Used In Engine Camshaft Assemblies And Accessory Drives
1982/09/22 Induction Bearing Heater Available
1982/09/22 Make Sure Generator Leads Do Not Move Against Frame
1982/09/22 New Fuel Injection Nozzle Assembly Gives More Constant Valve Opening Pressure
1982/09/22 Caterpillar-Built Industrial Engines Available In New Machines
1982/09/22 Water Cooled Turbocharger Now Used
1982/09/22 Change Made To Installation Procedure For 3N5620 Service Disconnect Spacer Group
1982/09/22 New Instruction Card Available For 6V87 Valve Stem Gauge
1982/09/22 New Torque Specification For Fuel Injection Pump Bushing
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.