List Of Service Publications
Usage:
This service information has become available since the last list published in the May 12, 1982, issue of Engine News. These forms can be ordered from your Caterpillar dealer to keep reference information current.
Caterpillar Information System:
1982/06/16 Larger Studs Can Be Used With Rear Exhaust Manifolds
1982/06/16 New, Improved Impeller Used In Water Pump
1982/06/16 Improved Water Separator Group Used
1982/06/16 List Of Main And Connecting Rod Bearings Currently Available
1982/06/16 Improvements Made To Input Shaft Group
1982/05/12 Two-Piece Guard For Alternator Fan And Belts
1982/05/12 Be Sure To Use Correct Water Temperature Regulator
1982/05/12 Bolts Now Used Instead Of Studs To Hold Cylinder Heads
1982/05/12 Inspection Marks On Bearings
1982/05/12 New Mounting Bracket For Mechanical Shut-Off Cable
1982/05/12 Expansion Tank Changed To Permit Installation Of Water Level Gauge
1982/05/12 Improved Plunger And New Spring Used In Mechanical Shutoff Group
1982/06/16 Carbon Cutting On Piston Top Land
1982/06/16 New Address For Repair Of Diagnostic Tools
1982/06/16 New Exhaust Tubes And Support Used
1982/06/16 Avoid Overheating Of Rear Power Take Off Clutches
1982/06/16 New Seal Used In Turbocharger Mounting; Check Mount Casting For Clearance
1982/08/25 Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25 New Air Starting Motor Group Available
1982/08/25 Information Available For The Installation Of Inserts In Cylinder Blocks And Spacer Plates
1982/08/25 Improved Engine Oil Cooler Assembly
1982/08/25 New Thrust Washer Can Prevent Wrong Oil Sample Readings
1982/08/25 Separate Valve Stem Gauges Available
1982/08/25 Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems