Improved Water Separator Group Used
Usage:
D330C, D333C, 3304, 3306 Industrial and Marine Engines, 3208 Industrial Engines
Description of Change: An improved water separator group is available for these engines. The new group has a new base and uses straight thread fittings with O-ring seals. The former group used tapered thread fittings and these at times caused cracks in the base when too much torque was used on the fittings. The new group will have a longer service life.
Adaptable To: The new 9N6519 Water Separator Group is a direct replacement for the former 7N950 Water Separator Group, which is canceled.
Caterpillar Information System:
1982/06/16 List Of Main And Connecting Rod Bearings Currently Available
1982/06/16 Improvements Made To Input Shaft Group
1982/05/12 Two-Piece Guard For Alternator Fan And Belts
1982/05/12 Be Sure To Use Correct Water Temperature Regulator
1982/05/12 Bolts Now Used Instead Of Studs To Hold Cylinder Heads
1982/05/12 Inspection Marks On Bearings
1982/05/12 New Mounting Bracket For Mechanical Shut-Off Cable
1982/05/12 Expansion Tank Changed To Permit Installation Of Water Level Gauge
1982/05/12 Improved Plunger And New Spring Used In Mechanical Shutoff Group
1982/05/12 6V4960 AC Current Probe Will Measure Current Easier
1982/05/12 New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach
1982/05/12 5P3519 Gauge Group Components Available Separately
1982/06/16 New, Improved Impeller Used In Water Pump
1982/06/16 Larger Studs Can Be Used With Rear Exhaust Manifolds
1982/06/16 List Of Service Publications
1982/06/16 Carbon Cutting On Piston Top Land
1982/06/16 New Address For Repair Of Diagnostic Tools
1982/06/16 New Exhaust Tubes And Support Used
1982/06/16 Avoid Overheating Of Rear Power Take Off Clutches
1982/06/16 New Seal Used In Turbocharger Mounting; Check Mount Casting For Clearance
1982/08/25 Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25 New Air Starting Motor Group Available
1982/08/25 Information Available For The Installation Of Inserts In Cylinder Blocks And Spacer Plates
1982/08/25 Improved Engine Oil Cooler Assembly