New Poppet Valve Will Decrease Chatter
Usage:
7261 And 7271 Marine Transmission
Description of Change: A new poppet valve is used in the control valve group on 7261 and 7271 Marine Transmissions. The new poppet valve has a smaller orifice. This will decrease the chatter (vibration) of the poppet valve during shifts of the transmission.
The former poppet valve had a larger orifice which permitted the valve to chatter.
Adaptable To: The new 9M4313 Poppet Valve is a direct replacement for the former 5M9554 Poppet Valve on these marine transmissions.
Identification of the poppet valve can be made by the orifice size and the shape of the valve. Be sure to measure the orifice size.
-
- ... The new 9M4313 Poppet Valve has a .61 mm (.024") orifice and has a hexagonal shape on the outside diameter.
- ... The former 5M9554 Poppet Valve has an .81 mm (.032") orifice and the outside diameter is round.
- ... The new 9M4313 Poppet Valve has a .61 mm (.024") orifice and has a hexagonal shape on the outside diameter.
Location of the new 9M4313 Poppet in the control valve group.
Caterpillar Information System:
1982/02/24 New Main Bearings And Connecting Rod Bearings Have Thicker Layer Of Surface Material
1982/02/24 Engine Storage; Engine Start-Up After Storage
1982/02/24 New Fuel Nozzle Adapter Assembly Used
1982/02/24 New Camshaft Has Improved Profile (Shape) Of Exhaust Cams
1982/02/24 New Engine Testing And Adjusting Tools Give More Accuracy And Longer Service Life
1982/02/24 List Of Service Publications
1982/02/24 "SIRS User Instructions" Available
1982/02/10 New Flywheel Assemblies Used
1982/02/10 Gasket Kits
1982/02/10 New Crankshaft Seal Group Has Assembled Rear Seal And Wear Sleeve
1982/02/10 Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance
1982/02/10 New Parts Used In Hydramechanical Shut Off; Prefill Oil Pump
1982/02/24 New Inlet And Exhaust Valves And Exhaust Inserts Available
1982/02/24 New Idler Shaft Used In Fuel Transfer Pumps
1982/02/24 Use 6V6035 Hardness Tester On Crankshafts
1982/02/24 Use The Correct Governor For Parallel Applications
1982/03/17 New Diaphragm Used In Fuel Ratio Control
1982/03/17 New Adapters And O-Ring Seals Used In Aftercooler Group
1982/03/17 Correct Lubrication Procedure Will Prevent Damage To Fan Drive
1982/03/17 New Gasket Used In Governor And Fuel Injection Pump Group
1982/03/17 Improved Bearing Used In Rear Power Takeoff Groups
1982/03/17 Heavy Duty Air Cleaner Available, With Precleaner And Automatic Dust Ejector
1982/03/17 New Double-Wall Fuel Injection Lines Group And Fuel Drain Group Available As Attachments For Protection Against Fuel Leakage
1982/03/17 Brass Plug Used To Prevent Corrosion