New Flywheel Assemblies Used
Usage:
3208 Industrial Engines (90N)
Description of Change: New flywheel assemblies are used on the above engines. The new flywheels are needed because of a change in the Spicer clutch that is used with them. The new flywheels permit clearance between the clutch disc rivets and the edge of the wear face of the flywheel. There is no clearance between the rivets and the wear face when one of the former flywheel assemblies is used with the new clutch.
Adaptable As: The new flywheel assemblies are direct replacements for the former flywheel assemblies as shown in the chart.
Caterpillar Information System:
1982/02/10 Gasket Kits
1982/02/10 New Crankshaft Seal Group Has Assembled Rear Seal And Wear Sleeve
1982/02/10 Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance
1982/02/10 New Parts Used In Hydramechanical Shut Off; Prefill Oil Pump
1982/02/10 New Piston Pin Retainer Used
1982/02/10 New Washers Permit Locks To Hold Better
1982/02/10 The Service Publications Information Feedback System
1982/02/10 New Liner Seat Insert With O-Ring Seal Available
1982/02/10 New Tools Available For Installation Of Cylinder Liner Seats; Service Tools For Counterboring Tool Group
1982/01/20 Improved Head Gasket Has Larger Fire Ring To Decrease Fretting
1982/01/20 List Of Service Publications
1982/01/20 Improvements And Test Procedures For Hydramechanical Shutoffs
1982/02/24 "SIRS User Instructions" Available
1982/02/24 List Of Service Publications
1982/02/24 New Engine Testing And Adjusting Tools Give More Accuracy And Longer Service Life
1982/02/24 New Camshaft Has Improved Profile (Shape) Of Exhaust Cams
1982/02/24 New Fuel Nozzle Adapter Assembly Used
1982/02/24 Engine Storage; Engine Start-Up After Storage
1982/02/24 New Main Bearings And Connecting Rod Bearings Have Thicker Layer Of Surface Material
1982/02/24 New Poppet Valve Will Decrease Chatter
1982/02/24 New Inlet And Exhaust Valves And Exhaust Inserts Available
1982/02/24 New Idler Shaft Used In Fuel Transfer Pumps
1982/02/24 Use 6V6035 Hardness Tester On Crankshafts
1982/02/24 Use The Correct Governor For Parallel Applications