1982/01/20 Caterpillar


Use FT1555 Generator Rotor Removal Tool To Remove And Install Rotor Assembly

Usage:


SR4 Generators

A new FT1555 Generator Rotor Removal Tool (see the illustration) is available for use on SR4 Generators which are used with large engines such as the D379, D398, D399, 3412 and 3500 Series Engines. The lifting tool is used to remove and install the rotor assembly.

The FT1555 Generator Rotor Removal Tool makes it easier to remove and install the rotor assembly. Also, correct use of the tool prevents possible damage to the stator and windings on the rotor assembly.

Make reference to the Service Manual, Form No. SENR7958 for correct use of this tool.

Drawings for the FT1555 Generator Rotor Removal Tool are available from your Division Service Manager.


FT1555 Generator Rotor Removal Tool.

Caterpillar Information System:

1981/12/16 Plate Added To Hold Oil Lines In Adapter For Left Side Oil Filter
1981/12/16 Make Sure Coolant Conditioner Elements Are Changed At Correct Intervals
1981/12/16 New Cylinder Liners And O-Ring Seals Give Longer Seal Life
1981/12/16 New Tube And Cover Assembly Make Service Easier
1981/12/16 How To Remove The 7L4511 Sleeve Assembly From Aftercoolers
1981/12/16 New Air Cleaner Group Has Six Clamps For Improved Seal
1981/12/16 New 6V4190 Auto Programmer Group And 6V4865 Auto Programmer Connector Used With 6V2100 Multitach
1981/12/16 New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group
1981/12/16 New Spacer; New Shaft Assembly Permits Pressure Lubrication Of Sun Gear
1981/11/25 New Shaft Assembly Used In Flexible Coupling Arrangement
1981/11/25 Use Of Metric Fasteners
1981/11/25 Check Bottom Surface Of Cylinder Liner Flange For Erosion And Wear
1982/01/20 New Torque Specification For Bushing
1982/01/20 Improvements And Test Procedures For Hydramechanical Shutoffs
1982/01/20 List Of Service Publications
1982/01/20 Improved Head Gasket Has Larger Fire Ring To Decrease Fretting
1982/02/10 New Tools Available For Installation Of Cylinder Liner Seats; Service Tools For Counterboring Tool Group
1982/02/10 New Liner Seat Insert With O-Ring Seal Available
1982/02/10 The Service Publications Information Feedback System
1982/02/10 New Washers Permit Locks To Hold Better
1982/02/10 New Piston Pin Retainer Used
1982/02/10 New Parts Used In Hydramechanical Shut Off; Prefill Oil Pump
1982/02/10 Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance
1982/02/10 New Crankshaft Seal Group Has Assembled Rear Seal And Wear Sleeve
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.