Plate Added To Hold Oil Lines In Adapter For Left Side Oil Filter
Usage:
3406 Industrial Engines
Description of Change: A plate is now used in the attachment oil lines and filter group for 3406 Industrial Engines. This plate will hold the oil lines in position in the adapter and prevent separation of the oil lines from the adapter. See the illustrations. Formerly, a washer and bolt were used to hold the oil lines in place. As the washer wears the oil lines can loosen and separate from the adapter.
Adaptable To: The 1W3797 Plate is adaptable to all 3406 Industrial Engines, that have the attachment 6N8789 Oil Filter Group, when all the new parts are used together.
1W3797 Plate.
Location of parts (top view of 6N8789 Oil Filter Group shown).
Caterpillar Information System:
1981/12/16 Make Sure Coolant Conditioner Elements Are Changed At Correct Intervals
1981/12/16 New Cylinder Liners And O-Ring Seals Give Longer Seal Life
1981/12/16 New Tube And Cover Assembly Make Service Easier
1981/12/16 How To Remove The 7L4511 Sleeve Assembly From Aftercoolers
1981/12/16 New Air Cleaner Group Has Six Clamps For Improved Seal
1981/12/16 New 6V4190 Auto Programmer Group And 6V4865 Auto Programmer Connector Used With 6V2100 Multitach
1981/12/16 New Springs For Timing Advance Used In Governor And Fuel Pump Drive Group
1981/12/16 New Spacer; New Shaft Assembly Permits Pressure Lubrication Of Sun Gear
1981/11/25 New Shaft Assembly Used In Flexible Coupling Arrangement
1981/11/25 Use Of Metric Fasteners
1981/11/25 Check Bottom Surface Of Cylinder Liner Flange For Erosion And Wear
1981/11/25 New Basic Turbocharger Group Prevents Possible Failures Of Compressor Wheel
1982/01/20 Use FT1555 Generator Rotor Removal Tool To Remove And Install Rotor Assembly
1982/01/20 New Torque Specification For Bushing
1982/01/20 Improvements And Test Procedures For Hydramechanical Shutoffs
1982/01/20 List Of Service Publications
1982/01/20 Improved Head Gasket Has Larger Fire Ring To Decrease Fretting
1982/02/10 New Tools Available For Installation Of Cylinder Liner Seats; Service Tools For Counterboring Tool Group
1982/02/10 New Liner Seat Insert With O-Ring Seal Available
1982/02/10 The Service Publications Information Feedback System
1982/02/10 New Washers Permit Locks To Hold Better
1982/02/10 New Piston Pin Retainer Used
1982/02/10 New Parts Used In Hydramechanical Shut Off; Prefill Oil Pump
1982/02/10 Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance