Single Connector Prevents Leakage From Fuel Filter Lines Groups
Usage:
3408;
3412 Industrial And Marine Engines
Description of Change: A single connector is now used instead of the elbows in the fuel filter lines group for 3408 and 3412 Industrial and Marine Engines. Use of the connector decreases possible leakage at the connections.
Adaptable As: The new connector is a direct replacement for the former parts as shown in the chart.
Location of the connector.
Caterpillar Information System:
1981/07/15 Use 6V4828 Snap Ring Pliers To Remove Snap Rings From Turbocharger Housing
1981/07/15 Procedure To Stop Lubricant Leakage From Flexible Couplings
1981/07/15 6V4133 Wedge Bracket Makes Cylinder Liner Removal Easier
1981/07/15 Use 6V4172 Injector Sleeve When You Clean Fuel Injectors
1981/07/15 Mailing Of Engine News And Truck Engine News Microfiche Libraries
1981/07/15 New Retainers Used To Hold Oil Pump Output Tube In Manifold
1981/07/15 Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods
1981/07/15 All Size Identification Marks On Engine Bearings Are Now Shown In Millimeters
1981/07/15 Stronger Fitting Used With Sending Unit For Oil Pressure Gauge
1981/07/15 New Turbocharger, Turbocharger Oil Line And Aftercooler Air Lines Group Used
1981/07/15 Ring Now Used To Hold Bearing In Auxiliary Drive Group
1981/07/15 Use 6V4068 Tool Group To Machine Camshaft Thrust Face
1981/08/26 New Spanner Wrenches Needed To Install Bearings On Marine Transmission Shafts
1981/08/26 O-Ring Seal Materials And Applications: Use Only The Correct Seal For The Specific Installation
1981/08/26 Use Of Different Anti-Seize Compound Prevents Problems With S.O.S. Tests
1981/08/26 New Spacers Used With Larger Valve Springs
1981/08/26 Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26 Delay Expected In Replacement Of Canceled Service Tools
1981/08/26 Use Correct Parts In Oil Pressure Relief Valve
1981/08/26 New Idler Pulley Groups Improve Service Life Of Vee-Belt
1981/08/26 New Water Temperature Regulator Improves Temperature Control
1981/08/26 Top Rings For Pistons Have Two Designs
1981/08/26 Washer, Seal Added To Improve Oil Filter Assembly
1981/08/26 New Information System For Engine Gasket Kits