1981/07/15 Caterpillar


Mailing Of Engine News And Truck Engine News Microfiche Libraries

Usage:


Now that ENGINE NEWS and TRUCK ENGINE NEWS are separate publications, the microfiche libraries for these publications are separate also. In the February, 1981 microfiche mailing, you received the first issues of TRUCK ENGINE NEWS, FICHE 1 and ENGINE NEWS (for INDUSTRIAL, MARINE AND GENERATOR SET ENGINES), FICHE 1. The last update of the original ENGINE NEWS, FICHE 5, was mailed in May, 1981. If you have been receiving ENGINE NEWS on microfiche, the mailing of the new microfiche libraries to you will be automatic. You do not need to apply for new subscriptions.

Both current libraries will be updated twice a year, in February and August. The ENGINE NEWS 1967-1980 will be revised from time to time so that Supplement references can be included on the microfiche.

For your convenience the subscription numbers of the microfiche libraries are included.

Caterpillar Information System:

1981/07/15 New Retainers Used To Hold Oil Pump Output Tube In Manifold
1981/07/15 Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods
1981/07/15 All Size Identification Marks On Engine Bearings Are Now Shown In Millimeters
1981/07/15 Stronger Fitting Used With Sending Unit For Oil Pressure Gauge
1981/07/15 New Turbocharger, Turbocharger Oil Line And Aftercooler Air Lines Group Used
1981/07/15 Ring Now Used To Hold Bearing In Auxiliary Drive Group
1981/07/15 Use 6V4068 Tool Group To Machine Camshaft Thrust Face
1981/07/01 Troubleshooting Water In Shut-Off Solenoid Housing
1981/07/01 Larger Air Cleaner Used For Less Restriction To Air Flow
1981/07/01 New Service Meter Used In Mechanical Shutoff Group
1981/07/01 List Of Service Publications
1981/07/01 New Gasket Used For End Cover On Inlet Manifold
1981/07/15 Use 6V4172 Injector Sleeve When You Clean Fuel Injectors
1981/07/15 6V4133 Wedge Bracket Makes Cylinder Liner Removal Easier
1981/07/15 Procedure To Stop Lubricant Leakage From Flexible Couplings
1981/07/15 Use 6V4828 Snap Ring Pliers To Remove Snap Rings From Turbocharger Housing
1981/07/15 Single Connector Prevents Leakage From Fuel Filter Lines Groups
1981/08/26 New Spanner Wrenches Needed To Install Bearings On Marine Transmission Shafts
1981/08/26 O-Ring Seal Materials And Applications: Use Only The Correct Seal For The Specific Installation
1981/08/26 Use Of Different Anti-Seize Compound Prevents Problems With S.O.S. Tests
1981/08/26 New Spacers Used With Larger Valve Springs
1981/08/26 Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26 Delay Expected In Replacement Of Canceled Service Tools
1981/08/26 Use Correct Parts In Oil Pressure Relief Valve
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.