1981/07/01 Caterpillar


New Service Meter Used In Mechanical Shutoff Group

Usage:


D353 Industrial And Marine Engines With Mechanical Shutoff Group

Description of Change: A new service meter group is used in the mechanical shutoff groups for D353 Industrial and Marine Engines. The new service meter has the correct gear ratio for use with D353 Engines. The former service meter did not have the correct gear ratio for the D353 Engines when a mechanical shutoff was used.

Adaptable To: The new 1W6607 Service Meter Group is a direct replacement for the 1W2815, 7N6623 or 3L1926 Service Meter Groups in this application. The former service meter groups are canceled.

Caterpillar Information System:

1981/07/01 List Of Service Publications
1981/07/01 New Gasket Used For End Cover On Inlet Manifold
1981/07/01 New Gasket Used In Front Housing Group
1981/07/01 New Seals And Clutch Discs Used
1981/07/01 Instruction Cards For "Go-No Go" Gauges Now Available
1981/07/01 Inspect Piston Skirts During Engine Overhaul Procedures
1981/07/01 Correct Use Of Keystone Ring Groove Gauges
1981/07/01 6V3145 Leveler Now Available
1981/06/03 Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers
1981/06/03 New Mounting Group For Overspeed Switch
1981/06/03 Locks No Longer Used On Flywheel Bolts; New Torque Specifications For Flywheel Bolts
1981/06/03 New Cover Assembly And Gasket Used In Oil Pump Group
1981/07/01 Larger Air Cleaner Used For Less Restriction To Air Flow
1981/07/01 Troubleshooting Water In Shut-Off Solenoid Housing
1981/07/15 Use 6V4068 Tool Group To Machine Camshaft Thrust Face
1981/07/15 Ring Now Used To Hold Bearing In Auxiliary Drive Group
1981/07/15 New Turbocharger, Turbocharger Oil Line And Aftercooler Air Lines Group Used
1981/07/15 Stronger Fitting Used With Sending Unit For Oil Pressure Gauge
1981/07/15 All Size Identification Marks On Engine Bearings Are Now Shown In Millimeters
1981/07/15 Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods
1981/07/15 New Retainers Used To Hold Oil Pump Output Tube In Manifold
1981/07/15 Mailing Of Engine News And Truck Engine News Microfiche Libraries
1981/07/15 Use 6V4172 Injector Sleeve When You Clean Fuel Injectors
1981/07/15 6V4133 Wedge Bracket Makes Cylinder Liner Removal Easier
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.