Instruction Cards For "Go-No Go" Gauges Now Available
Usage:
During engine reconditioning procedures, "Go-No Go" gauges are used to see if some components can be used again. Each gauge is sent to the dealer with an instruction card. Separate replacement cards are now available if the original instruction card has been damaged or lost (Illustration 1-4). Each card fits inside the 5P4227 Tag Holder, which can be ordered separately. The four replacement cards which follow can now be ordered on a Miscellaneous Material Order form (01-019335-02).
Illustration 1.
Illustration 2.
Illustration 3.
Illustration 4.
Caterpillar Information System:
1981/07/01 Inspect Piston Skirts During Engine Overhaul Procedures
1981/07/01 Correct Use Of Keystone Ring Groove Gauges
1981/07/01 6V3145 Leveler Now Available
1981/06/03 Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers
1981/06/03 New Mounting Group For Overspeed Switch
1981/06/03 Locks No Longer Used On Flywheel Bolts; New Torque Specifications For Flywheel Bolts
1981/06/03 New Cover Assembly And Gasket Used In Oil Pump Group
1981/06/03 Use Correct Specifications To Check Piston Ring Gaps
1981/06/03 Replacement Bushings For Delco-Remy Electric Starting Motors Must Be Machined For Correct Clearances
1981/05/20 Washer Added Between Bolt And Thrust Plate For Oil Pump Idler Gear
1981/05/20 Hardened Nuts And Higher Torque Now Used In Ahead And Astern Clutch Groups
1981/05/20 Use 6V4089 Reamer Assembly To Clean Nozzle Bores
1981/07/01 New Seals And Clutch Discs Used
1981/07/01 New Gasket Used In Front Housing Group
1981/07/01 New Gasket Used For End Cover On Inlet Manifold
1981/07/01 List Of Service Publications
1981/07/01 New Service Meter Used In Mechanical Shutoff Group
1981/07/01 Larger Air Cleaner Used For Less Restriction To Air Flow
1981/07/01 Troubleshooting Water In Shut-Off Solenoid Housing
1981/07/15 Use 6V4068 Tool Group To Machine Camshaft Thrust Face
1981/07/15 Ring Now Used To Hold Bearing In Auxiliary Drive Group
1981/07/15 New Turbocharger, Turbocharger Oil Line And Aftercooler Air Lines Group Used
1981/07/15 Stronger Fitting Used With Sending Unit For Oil Pressure Gauge
1981/07/15 All Size Identification Marks On Engine Bearings Are Now Shown In Millimeters