Two Thinner Spacers Available For Use During Adjustment Of Off-Engine Timing Dimension
Usage:
D330 And D333 Industrial And Marine Engines
During adjustment of the off-engine timing dimension for scroll fuel systems used on D330 and D333 Industrial and Marine Engines, spacers are removed and added to get the correct dimension. Two new, thinner spacers are available for this purpose.
The 9N6495 Spacer is 4.11 mm (.162") thick, and the 9N6496 Spacer is 4.22 mm (.166") thick.
Add these part numbers and thickness dimensions to the chart, "Spacers And Lifters For Timing Dimension Setting," on page 19 of "Checking Off-Engine Timing Dimension Setting With 5P6600 Timing Fixture Group," Special Instruction, Form No. SMHS7130-02.
Caterpillar Information System:
1980/12/10 New Gasket Improves Operation Of Shut-Off Groups
1980/12/10 6V4021 Piston Ring Compressor Group Available
1980/12/10 New Front Housing Assembly And Gaskets Used
1980/12/10 Some Remanufactured 3406 Engines Have The Wrong Reference Serial Number On The Identification Plate
1980/12/10 6V4008 Valve Seat Extractor Now Available
1980/11/12 Rack Shut-Off Solenoid Can Be Removed And Engine Started When There Is An Emergency
1980/11/12 Two Replacement Lights Available For 5P7277 Voltage Tester
1980/11/12 A Group Of Special Instructions On The Subject Of Alignment Is Currently Available
1980/11/12 6V3147 Main Bearing Wrench Now Available
1980/11/12 List Of Service Publications
1980/11/12 Modification Of Puller Bolt Prevents Thread Damage During Removal Of Sleeve From Sleeve Metering Fuel System
1980/11/12 Improved Cable Assembly For Mechanical Shut-Off Group
1980/12/10 Different O-Ring Seal Now Used On The Oil Pump Suction Tube
1980/12/10 Use Fluid-Type Vibration Damper To Control Vibrations
1981/01/21 New Control Valve Group Used To Prevent Ratchet-Type Noise And Rough Clutch Engagement
1981/01/21 Improvements Made To 5P9718 And 6V186 Disc Pads Used During Gasket Removal
1981/01/21 New Connecting Rod And Main Bearings Have A Thicker Coating (Layer) Of Lead-Tin Overlay
1981/01/21 6V4019 Camshaft Pilot Group Is Available
1981/01/21 New Bearing Sizes And Identification Codes For AiResearch Remanufactured Turbocharger Cartridges
1981/01/21 Larger Plug Used In The Ends Of The Rocker Arm Shaft Assembly
1981/01/21 Use 2P2333 Manifold Sealer On Exhaust Manifold Slip Joints (Junction) During Assembly
1981/01/21 List Of Service Publications
1981/01/21 Exhaust Elbow Support Improved
1981/01/21 FT1576 Puller Plate Used For Removal Of Crankshaft Gear; Drawings For FT1576 Puller Plate Can Be Used For Modification Of Existing Puller Plate