Easy-To-Make Tool Holds Fuel Injection Nozzles According To Cylinder Number
Usage:
When removed from an engine, fuel injection nozzles are usually given identification as to which cylinder each came from. This identification is of assistance during troubleshooting.
There is no tool available to hold the nozzles and make this identification. But, the illustration shows how one dealer, Power Systems Associates of Los Angeles, California, fabricated a fuel injection nozzle tool from a 9L7276 Cover. This fabricated tool will hold up to eight fuel injection nozzles, with identification of the cylinder number from which each was removed.
This tool, used to hold fuel injection nozzles, was fabricated from a 9L7276 Cover.
Caterpillar Information System:
1980/09/10 Oil Pump And Lines Group Changed To Use Different Method Of Flow Control For Emergency Lubrication System{3310,3311}
1980/09/10 Special Bolts Available For Better Protection Against Modifications Of Fuel System And Governor Settings
1980/09/10 4S6553 Engine Evaluation Test Instrument Group Has Been Canceled
1980/09/10 5P1746 Governor Sealing Tool Available Separately
1980/09/10 6V3143 Distorter Adapter Available For Use With 5P7409 Wear Sleeve Distorter For Removal Of Crankshaft Wear Sleeves
1980/08/13 Carbon Cutting On Thrust Side Of Piston Top Land Is Normal Condition For Pistons With Offset (Not In Center) Pin Bores
1980/08/13 Higher Capacity Auxiliary Pump Group Is Now Available
1980/08/13 Pistons Which Use Keystone-Type Rings Can Be Installed In Place Of Pistons Which Use Rectangular-Type Rings
1980/08/13 Some Valve Lifter Assemblies Have A Black Color On The Finished Surface
1980/08/13 Alcohol Fuels Are Not Recommended For Use In Caterpillar Diesel Engines At The Present Time
1980/08/13 New Caterpillar Publication, "Questions And Answers About Engine Bearings" Is Available
1980/08/13 6V3030 Digital Multimeter, 6V3031 Case And 6V3032 Test Lead Kit Are Now Available For Troubleshooting Electrical Circuits And Components
1980/09/10 List Of Service Publications
1980/09/10 Cartridge Repair Kit Available For AiResearch Turbochargers
1980/09/10 6V2086 And 6V2087 Seal And Wear Sleeve Installers Available
1980/09/10 Reference List Of Pistons Used With The Different Types Of Connecting Rods
1980/09/10 CAUTION: Procedure For Adjustment Of Fuel Rack Setting On Hydramechanical Governors Has Been Changed
1980/09/10 6V2119 Profile Tool Group Is Available For Inspection Of All Crankshafts In Caterpillar Engines
1980/09/10 New Oil Filter Base Has Larger Oil Passages; Some Bases Need Modification
1980/09/10 6V3025 Battery Cable Repair Kit Now Available{1402,1408,0611}
1980/09/10 Special Cup Plugs For Use In Oversize (Larger Than Standard Size) Bores In Valve Rocker Arm Shafts
1980/09/10 New Oil Scavenge Tube Assembly Used In Oil Lines Group
1980/10/01 Protect Your Reconditioned Or Rebuilt Engines During Start-Up
1980/10/01 Fretting Material Must Be Removed Before Installation Of New Bearings