1980/09/10 Caterpillar


4S6553 Engine Evaluation Test Instrument Group Has Been Canceled

Usage:


Some components of the 4S6553 Engine Evaluation Test Instrument Group have not been regularly available. Because of this problem, the 4S6553 Engine Evaluation Test Instrument Group has been canceled.

Two groups, an engine pressure group and a multiple use tachometer group, will be available in the future for replacement of the 4S6553 Engine Evaluation Test Instrument Group.

The 1P7443 Tachometer, 1P7444 Tachometer Generator and 4S6997 Manifold Pressure Group which are service components of the group, will be available for as long as there is a supply.

To keep a component supply available, it is Caterpillar's recommendation that these components, when in need of repairs, be exchanged.

Components and their current exchange prices are given in the chart which follows.

The components to be exchanged must be sent to:

Aircraft Instrument & Development Co.
317 E. Lewis
Wichita, Kansas 67202
U.S.A.

The components will be exchanged and shipment will be made in one or two work days. If a component is damaged beyond repair, you will be told, and a new component will have to be purchased from the Caterpillar Parts Department.

Caterpillar Information System:

1980/09/10 5P1746 Governor Sealing Tool Available Separately
1980/09/10 6V3143 Distorter Adapter Available For Use With 5P7409 Wear Sleeve Distorter For Removal Of Crankshaft Wear Sleeves
1980/08/13 Carbon Cutting On Thrust Side Of Piston Top Land Is Normal Condition For Pistons With Offset (Not In Center) Pin Bores
1980/08/13 Higher Capacity Auxiliary Pump Group Is Now Available
1980/08/13 Pistons Which Use Keystone-Type Rings Can Be Installed In Place Of Pistons Which Use Rectangular-Type Rings
1980/08/13 Some Valve Lifter Assemblies Have A Black Color On The Finished Surface
1980/08/13 Alcohol Fuels Are Not Recommended For Use In Caterpillar Diesel Engines At The Present Time
1980/08/13 New Caterpillar Publication, "Questions And Answers About Engine Bearings" Is Available
1980/08/13 6V3030 Digital Multimeter, 6V3031 Case And 6V3032 Test Lead Kit Are Now Available For Troubleshooting Electrical Circuits And Components
1980/08/13 Two New Front Power Take-Off Groups Are Available
1980/08/13 New Bend Specification For Used Or Field Reground Crankshafts
1980/08/13 Some Nuts Used On Main Bearing Caps Are Smaller Than Standard Size Across The Flat Sides
1980/09/10 Special Bolts Available For Better Protection Against Modifications Of Fuel System And Governor Settings
1980/09/10 Oil Pump And Lines Group Changed To Use Different Method Of Flow Control For Emergency Lubrication System{3310,3311}
1980/09/10 Easy-To-Make Tool Holds Fuel Injection Nozzles According To Cylinder Number
1980/09/10 List Of Service Publications
1980/09/10 Cartridge Repair Kit Available For AiResearch Turbochargers
1980/09/10 6V2086 And 6V2087 Seal And Wear Sleeve Installers Available
1980/09/10 Reference List Of Pistons Used With The Different Types Of Connecting Rods
1980/09/10 CAUTION: Procedure For Adjustment Of Fuel Rack Setting On Hydramechanical Governors Has Been Changed
1980/09/10 6V2119 Profile Tool Group Is Available For Inspection Of All Crankshafts In Caterpillar Engines
1980/09/10 New Oil Filter Base Has Larger Oil Passages; Some Bases Need Modification
1980/09/10 6V3025 Battery Cable Repair Kit Now Available{1402,1408,0611}
1980/09/10 Special Cup Plugs For Use In Oversize (Larger Than Standard Size) Bores In Valve Rocker Arm Shafts
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.