Changes To Oil Level Gauge Group Improve Accuracy Of Oil Level Indications
Usage:
3406 Industrial And Marine Engines Equipped With 4N9951 Oil Level Gauge Group (LH)
Description of Change: A new guide assembly is used for the oil level gauge in the above 3406 Engines. The new guide assembly has the vent hole moved to a higher location in the tube than the hole in the former guide assembly. This will keep oil out of the vent hole, and give better accuracy in oil level indications.
Adaptable As: The new 1N3810 Guide Assembly is a direct replacement for the former 8N1671 Guide Assembly, which is canceled.
Caterpillar Information System:
1980/05/14 Use The FT1525 Alignment Pin And FT1526 Fixture When Reconditioning Earlier 3208 Sleeve Metering Fuel Systems
1980/05/14 Turbine Wheel Shroud Design Changed; Snap Ring No Longer Used
1980/05/14 Changes To 9S240 Rack Position Tool Group; Revision To Special Instructions
1980/05/14 New 6V2120 Spline Sprocket Improves Depth Control Of 5P4175 Boring Tool Group
1980/04/30 New Liner Seat Insert For No. 1 And No. 4 Cylinders Of D353 Engines
1980/04/30 New Top Piston Ring Has Plasma-Coated Face
1980/04/30 Different Vibration Damper Now Used
1980/04/30 New 1N3270 Auxiliary Drive Group Available As Attachment
1980/04/30 Improvements Made To Water Separator Groups
1980/04/30 Hardened Washers Now Used On Bolts For Fan Shroud
1980/04/30 List Of Service Publications
1980/04/30 Crankcase Capacity Increased And New Oil Level Gauges Used; Specifications For Conversion Of Existing Gauges
1980/05/14 List Of Service Publications
1980/05/14 Boss Can Be Removed From Spacer Plate Cylinder Block To Get Clearance For Oil Filler Tube
1980/06/04 Possible Cause Of A Low Idle Misfire And/Or Backfire
1980/06/04 Improvements To Engine Oil Lines Group Makes Installation Easier; Prevents Reverse Connections
1980/06/04 New Plug With Straight-Threads Used In Engine Variable Timing Drive
1980/06/04 Improved Procedure Can Be Used To Adjust Voltage Gain
1980/06/04 Reverse Flow Check Assembly Now Used In Fuel Injection Pump Assemblies
1980/06/04 Check For Short Circuit In Rotor Field Windings If Low AC (Alternating Current) Voltage Is A Problem
1980/06/04 New Check Valve Used In Fuel Injection Pump Assembly
1980/06/04 New Cylinder Sleeve Is Available For Repairs Of Worn And/Or Damaged Cylinders
1980/06/04 New Part Available To Check The 3S1467 Plunger And Barrel Assemblies
1980/06/04 Oil Pump Drive Sleeves Now Available Separately For Parts Service