1980/04/30 Caterpillar


List Of Service Publications

Usage:


This service informtion has become available since the last list published in the March 12, 1980 issue of Engine News. These forms can be ordered from your Caterpillar dealer to keep reference information content.

Caterpillar Information System:

1980/04/30 Crankcase Capacity Increased And New Oil Level Gauges Used; Specifications For Conversion Of Existing Gauges
1980/04/30 Boring Machine, Adapter Groups And Sleeves Available For Repair Of Damaged Cylinder Blocks
1980/04/30 Wrong Installation Of Oil Cooler Gasket Can Cause High Oil Temperatures
1980/04/30 Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again
1980/04/09 Caution: Outboard Bearing Must Be Removed From Extended Shaft Of Front Power Takeoff Before The Engine Is Moved
1980/04/09 Important: Use Only 12 Volts Direct Current To Boost Start 3208 Truck Engines Equipped With Exhaust Gas Recirculation Systems
1980/04/09 Remanufactured Short Blocks Are Available For Repairs Of Early 3406 Engines
1980/04/09 Different Water Temperature Regulators Now Used To Prevent Overheating
1980/04/09 Dowtherm 209 Full-Fill Coolant
1980/04/09 6V2023 Flow Check Adapter Group Is Available
1980/03/12 New Control Valve Body
1980/03/12 Crankshaft Rear Seal And Wear Sleeve Are Now Serviced As A Group Instead Of Separate Parts
1980/04/30 Hardened Washers Now Used On Bolts For Fan Shroud
1980/04/30 Improvements Made To Water Separator Groups
1980/04/30 New 1N3270 Auxiliary Drive Group Available As Attachment
1980/04/30 Different Vibration Damper Now Used
1980/04/30 New Top Piston Ring Has Plasma-Coated Face
1980/04/30 New Liner Seat Insert For No. 1 And No. 4 Cylinders Of D353 Engines
1980/05/14 New 6V2120 Spline Sprocket Improves Depth Control Of 5P4175 Boring Tool Group
1980/05/14 Changes To 9S240 Rack Position Tool Group; Revision To Special Instructions
1980/05/14 Turbine Wheel Shroud Design Changed; Snap Ring No Longer Used
1980/05/14 Use The FT1525 Alignment Pin And FT1526 Fixture When Reconditioning Earlier 3208 Sleeve Metering Fuel Systems
1980/05/14 Changes To Oil Level Gauge Group Improve Accuracy Of Oil Level Indications
1980/05/14 List Of Service Publications
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.