1979/10/31 Caterpillar


New-3208 Engine Maintenance Tips Wall Chart

Usage:


A 3208 Engine Maintenance Tips Wall Chart is available for fast, easy reference. In short, clear form, the chart gives basic maintenance instructions for the four most important engine systems: lubrication, fuel, cooling and air induction. See Illustration 1. Easy access to this type of information is most important during cold temperatures, so the chart has been specifically made to hang on bulletin boards in customer shops. In addition, the chart is large-15 x 22" (381 x 558 mm), and made of vinyl impregnated paper which makes it grease resistant and tear resistant.


Illustration 1. Single SEBU5691-01 Chart.

Form No. SEBU5691-01 is a single chart. Form No. SEBU5709 is a package of 50 in a display box (Illustration 2).

The chart is also available in Spanish, Form No. SSBU5691-01.


Illustration 2. SEBU5709 package of 50 in display box.

Caterpillar Information System:

1979/10/31 Different Thrust Bearing And Thrust Rings Now Used In Turbochargers
1979/10/31 Support Plates Must Be Used To Install Earlier Marine Transmissions
1979/10/31 Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves
1979/10/31 Improved Seal Now Used In Seawater Pump
1979/10/24 7N9843 Fuel Injection Valve Nozzle Assembly Now Used In Truck Engines
1979/10/24 New Coolant Temperature Regulator Housing And Vent Line Valve Give Better Control Of Engine Cooling; Conversion Kits Available.
1979/10/24 Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. FActories
1979/10/24 Improved Seal Used In Raw Water Pump On Marine Engines
1979/10/24 New Camshaft Housing Gasket Has Increased Resistance To High Temperature
1979/10/24 Cold Temperature Starting Procedures For Air Compressor And Drill Engines
1979/10/24 New Hydromechanical Shut-Off Is Available
1979/10/03 New Aftercooler Core Has Stronger Construction And Corrosion Resistance
1979/10/31 Wider Connecting Rods Have More Bearing Area
1979/10/31 The FT1486 Chain Assembly Can Be Used For Emergency Repair Of Front Power Takeoff Clutches
1979/10/31 List Of Service Publications
1979/10/31 New Connecting Rod Is Tapered In Piston Pin Area
1979/11/28 Size Of Glass Beads Is Important When Used To Clean Engine And Turbocharger Parts
1979/11/28 Improvements Made To Fuel Injection Pump And Governor Group
1979/11/28 Repair Of Damaged Or Worn Balancer Shaft Bores
1979/11/28 Former Oil Pump Group Is Now Used Again
1979/11/28 Common Sense Tips For Cab-Overs
1979/11/28 New Cylinder Heads Are More Rigid And Stronger
1979/11/28 List Of Service Publications
1979/11/28 New Cylinder Block Has More Material Around Liner Seat Area
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.