1979/10/03 Caterpillar


Tips For SIRS (Service Information Retrieval System) Users

Usage:


The Bi-Modal Reader-Printer

The microfiche reader-printer is one of the most important tools used with the Service Information Retrieval System libraries. Some reader-printers have one characteristic which is very useful. They are bi-modal. That is, they have the ability to make paper copies from either negative or positive fiche. Negative fiche are black. See Illustration 1. Positive fiche are clear. See Illustration 2. Because Caterpillar libraries have both negative and positive microfiche, the single-mode reader-printer is not practical.


Illustration 1.

It is the recommendation of Caterpillar that dealers install the bi-modal reader-printers in areas where personnel use the SIRS, NPR, Parts Books and Service Manual libraries on the same viewing equipment. The reasons are basic-the screen is easy to read, the photos are clear and copies are black type on white paper.

Reader-printers are not available from Caterpillar for dealer purchase. An office equipment dealer in your area will give you his recommendation of a bi-modal reader-printer.


Illustration 2.

Caterpillar Information System:

1979/10/03 List Of Service Publications
1979/10/03 Different Mounting Hole Locations In Ring Gear Plate Assembly And Rotor Assembly For BrakeSaver
1979/10/03 Steel Plates Are Now Used To Hold The Element In Position In The Panel-Type Air Cleaner Housing Assembly
1979/10/03 Quick Disconnect Coupling On Optional Modification Of 5P4150 Nozzle Tester Permits Faster Exchange Of Adapters
1979/09/19 6V2055 High Vacuum Grease Gives Better Oil Seal
1979/09/19 Improved Sea Water Pump Now Used
1979/09/19 New Liner Seat Inserts For Spacer Plate Cylinder Blocks Are Made Of Stainless Steel
1979/09/19 Stronger Bolt Now Used With Exhaust Manifold
1979/09/19 Raw Water Pump Improved
1979/09/19 Cranking Speeds Necessary To Start Diesel Engines
1979/09/19 New BrakeSaver Control Valve Group Has Improved Diaphragm
1979/09/19 New Gasket Used In Water Lines Group For Aftercooler
1979/10/03 Recommendation For Use Of A FLEX-HONE On 1100, 3100 and 3200 Series Engines
1979/10/03 New Aftercooler Core Has Stronger Construction And Corrosion Resistance
1979/10/24 New Hydromechanical Shut-Off Is Available
1979/10/24 Cold Temperature Starting Procedures For Air Compressor And Drill Engines
1979/10/24 New Camshaft Housing Gasket Has Increased Resistance To High Temperature
1979/10/24 Improved Seal Used In Raw Water Pump On Marine Engines
1979/10/24 Engine Oil Viscosity Changed To SAE 10W/30 For Shipment From All U.S. FActories
1979/10/24 New Coolant Temperature Regulator Housing And Vent Line Valve Give Better Control Of Engine Cooling; Conversion Kits Available.
1979/10/24 7N9843 Fuel Injection Valve Nozzle Assembly Now Used In Truck Engines
1979/10/31 Improved Seal Now Used In Seawater Pump
1979/10/31 Use The 6V2034 Micrometer Adapter To Measure Lip Thickness Of Engine Valves
1979/10/31 Support Plates Must Be Used To Install Earlier Marine Transmissions
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.