1979/04/25 Caterpillar


Conversion Group Available To Install Woodward Governor On Engines Equipped With Mechanical Governor

Usage:


3408, 3412 Industrial and Marine Engines

Description of Change: A conversion group is now available to permit installation of a Woodward PSG Governor on 3408 and 3412 Industrial and Marine Engines that have a mechanical governor as original equipment. With this conversion, existing engines can be adapted to specific applications. Formerly, it was necessary to change the complete fuel system to install the Woodward PSG Governor.

Adaptable To: The new 8N3104 Governor Conversion Group (Woodward PSG) is directly adaptable to all earlier 3408 and 3412 Industrial and Marine Engines. Special Instruction Forms SMHS7436 and SMHS7188 are sent with each group for installation and linkage adjustment.

Caterpillar Information System:

1979/04/25 Inspection Of Connecting Rods In Parts Stocks
1979/04/25 6V112 Repair Kit Available For Parts Service Of The 8H8558 Nut Spinner
1979/04/04 New Pistons And Timing Advance Unit Give Better Emissions Control And Easier Starts
1979/04/04 A Reverse Connection Of Oil Filter Hoses Can Cause Bearing Failures
1979/04/04 Fabricated Air-To-Water Aftercooler Available For Dynamometer Testing Of Engines Equipped With Air-To-Air Aftercoolers
1979/04/04 Improved Fuel Priming Pumps Give Longer Service Life
1979/04/04 New Woodward Governor Control Used On Diesel Engines; Former Control Now Used On Gas Engines Only
1979/04/04 List Of Service Publications
1979/04/04 Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines
1979/04/04 New Oil Jet Tube In Cylinder Block Gives More Clearance For Pistons And Connecting Rods
1979/04/04 New Fabricated Tools Available For Service Work On 7211 And 7221 Marine Transmissions
1979/03/14 Replacement Bushing Available For Cast Iron Rocker Arms Only
1979/04/25 Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems
1979/04/25 Inspection Of Oil Pump After Long Periods Of Service Can Prevent Engine Damage
1979/04/25 How To Extend The Service Life Of 1P5550 Fuel Cam Locking Tool Assembly
1979/04/25 New Oil Cooler Bonnets Used On 3408 And 3412 Engines
1979/04/25 Inspection Of Oil Filters In Parts Stocks
1979/04/25 New Exhaust Valve Has Improved Three-Piece Construction
1979/04/25 Dowtherm Test Strips No Longer Available
1979/04/25 During Installation Of Crankshaft Piston Ring Seals, Put Silicone Grease In The Groove And On The Seal
1979/04/25 Stronger Output Shaft Now Used In 2N3909 Tachometer Drive Adapter
1979/05/09 New Ring Gears Used In Flywheel Assemblies
1979/05/09 Improved Gasket Now Used Between The Flywheel Housing And The Cylinder Block
1979/05/09 New " Drive 6V94 Universal Joint Is Available
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.