1979/01/24 Caterpillar

Ether Starting Aid Groups Are Now Available


3406 (90U, 91U, 92U),
3408 (67U, 99U, 28V, 48W),
3412 (38S, 60M) Industrial, Marine, and Truck Engines

SUPPLEMENT: 03/07/79


In the article "Ether Starting Aid Groups Are Now Available", the Part Number shown for the ether cylinder is wrong. The correct Part Number is 7N296.

--------------- END SUPPLEMENT ---------------

Description of Change: Four ether starting aid groups are now available for the above industrial, marine, and truck engines. The ether starting aid groups are an attachment that can be installed by dealers or original equipment manufacturers (OEM). The ether cylinder is not a part of the starting aid groups and must be ordered separately.

Adaptable To: The 3400 Series Industrial, Marine, and Truck Engines shown in the chart that follows. The four ether starting aid groups are not available for parts service as a complete group. See column three in the Numerical Parts Record (NPR), for the complete list of parts needed. The 7N296 Ether Cylinder must be ordered separately.

INSTALLATION: Special Instruction Form No. SMHS7535 is available for complete installation information.

Caterpillar Information System:

1979/01/24 A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/10 Improved Woodward Governor Groups
1979/01/10 Stronger Fan Adjustment Bracket Used In Fan Drive Group
1979/01/10 Caution: Do Not Change Orifice In Water Outlet Of Auxiliary Pump Group
1979/01/10 New 6V87 Gauge Measures Valve Stem Wear
1979/01/10 Check The Adjustment Of The Original Tachometer Before A New Tachometer Is Installed
1979/01/10 New Switch Assembly Used With Exhaust Gas Recirculation System
1994/07/08 Improved Lubrication Of Attachment Coupler Bushing{5133}
1999/11/01 Download Flash Files By Using The Caterpillar Service Information System (SIS) Or SIS Web{1901,1920}
1999/11/01 138-8440 Component Cleaner May Damage Electrical Connectors{0644}
1999/11/01 EPA Required Low NOx Rebuild Kits On Overhauled Engines{1290}
1999/10/01 Optional Service Replacement Aluminum Piston Cylinder Kit Available {1241,1331}
1979/01/24 Current Chart For Dynamometer Adapters
1979/01/24 New Tachometer Drive Adapter Has Increased Service Life
1979/01/24 5P9705 Tapered Rod Tool Group Used For Removal And Installation Of Piston Pin Bearings In Tapered Connecting Rods
1979/01/24 Longer Bolts Are Now Used To Fasten The Engine Fan Assembly To The Adapter
1979/01/24 List Of Service Publications
1979/03/07 New Design Fuel Injection Valve Body Used In Fuel Injection Lines Group
1979/03/07 Federal Law Prohibits Tampering With Noise Control Systems
1979/03/07 Stronger Suction Bell Assembly Now Used In Engine Oil Lines Group
1979/03/07 New Larger Capacity Water Separator Is Available
1979/03/07 High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage
1979/03/07 Engine Mounted Exhaust Brake Systems Can Be Used To Extend Service Brake Life
1979/03/07 New Exhaust Valve And Valve Guide
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.