1986/06/01 Caterpillar


FT Tooling Prints Available For Bushing Installation In Governor Housing

Usage:


3406B Truck Engines

Prints of the FT1949 Reamer, FT1950 Fixture Assembly and FT1951 Bushing are available. These tools are used to install an 8N3945 Bushing in the 8N9679 Governor Housing on 3406B Truck Engines. Special Instruction, Form SEHS8585, provides additional information about installing the bushing in the governor housing.

Dealers in the NACD, COSA and Caterpillar Americas can order drawings of Fabricated Tools (FT) from the address that follows. All other dealers can order drawings from their Subsidiary Service Department.

Caterpillar Tractor Co.
AD180 Publications Print Room
600 W. Washington Street
East Peoria, IL 61630-0371 (U.S.A.)
Phone: 309-675-7292
Telex: 710-822-0198

Caterpillar Information System:

1986/06/01 Two Types Of Maintenance Management Publications Available For Truck Engines
1986/06/01 New Service Tools Available
1986/05/01 List Of Service Publications
1986/05/01 New Alternators Are Self-energizing And Have Built-in Regulators
1986/05/01 Service Reminders For 3400 Family Of Truck Engines
1986/05/01 Use Care When Removing Oil Pan And 9N3167 Plate
1986/04/01 Adjust Bridge Whenever Valve Clearance Adjustments Are Made
1986/04/01 Bleed Screw Washer (seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01 New Air-to-air Aftercooler Arrangements Used On Truck Engines
1986/04/01 Silicone Rubber Hoses Available For Engine Oil Cooler Water Lines
1986/03/01 Air-To-Air Aftercooler Test Group Available
1986/03/01 Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/06/01 Nitrate Test Kit Available For Cooling Systems
1986/06/01 Flywheel Housing With 6° Offset Transmission Mounting Holes Must Be Used In GMC Trucks
1986/06/01 New 8T5334 Surface Temperature Thermocouple Probe Available
1986/06/01 Hose Clamp Recommendations For ATAAC Engines
1986/06/01 Cleaning Procedure For Air-To-Air Aftercooler On ATAAC Engines
1986/06/01 New Paper Towels Available
1986/06/01 Determining The Cause Of Glow Plug Tip Failures
1986/06/01 Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01 Caterpillar Offers Used Truck Engine Warranty
1986/07/01 Changes To 3208 Naturally Aspirated Truck Engines For 1986 Model Year
1986/07/01 New Service Tools Available
1986/07/01 Brushless Alternators May Not Charge In Certain Conditions
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.