1986/02/01 Caterpillar


New Cylinder Liner Available

Usage:


3400 Series Truck Engines

Description of Change: A new cylinder liner is available for use on the engines listed above. The new cylinder liner decreases the liner-to-block diametral clearance from .305 ±.102 mm (.0120±.0040") to .152±.102 mm (.0060 ±.0040"). The change will help prevent O-ring seal fretting caused by cylinder liner motion.

Adaptable As: The new 7W3550 Liner is in effect with 3406B Truck Engines 7FB38551 and 3408 Truck Engines 28V4749 and can be adapted to all earlier engines.

Caterpillar Information System:

1986/02/01 Truck Engine Performance Checklist Available For North American Dealers
1986/02/01 Longer Bolts Used In Turbocharger Air Lines Groups
1986/02/01 New 8T2998 Lubricant Available
1986/02/01 High Silicates In Antifreeze
1986/01/01 How To Use Temperature And Pressure Probes With Self-Sealing Probe Adapter Groups
1986/01/01 Oil Total Base Number (TBN) Test Kit Available
1986/01/01 Fuel Sulfur Analyzer Available
1986/01/01 Put Grease On Front Crankshaft Seal Before Installing The Crankshaft Pulley And Damper
1986/01/01 New Service Tools Available
1985/12/01 Later 3406B And 3408B Truck Engines Have Higher Minimum Coolant Temperatures
1985/12/01 Gasket Leakage On Aftermarket Fuel Filters
1985/12/01 New, Tougher Gasket Used Between Block And Front Housing
1986/02/01 Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01 Incorrect Air Compressor Installation Can Cause An Early Failure
1986/02/01 Attention "New" Caterpillar BrakeSaver Owners!
1986/03/01 Screens Added To Inlet Air Manifolds
1986/03/01 Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers
1986/03/01 Improved Cylinder Head Gasket
1986/03/01 Stronger Oil Pan Used
1986/03/01 Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01 Air-To-Air Aftercooler Test Group Available
1986/04/01 Silicone Rubber Hoses Available For Engine Oil Cooler Water Lines
1986/04/01 New Air-to-air Aftercooler Arrangements Used On Truck Engines
1986/04/01 Bleed Screw Washer (seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.