1985/10/01 Caterpillar


Two, New Top Dead Center Magnetic Transducers Available

Usage:


All Caterpillar Truck Engines

Two, new magnetic transducers are available. One new transducer is shorter than the existing 6V2197 Transducer, and the other new transducer is longer than the 6V2197 Transducer. See chart.

The 8T5184 Transducer is for use where the 6V2197 is too long, such as on some 3208 Engines where access to the top center hole is limited by the fan belts and fan guard. The 8T5185 Transducer can be used where the 6V2197 is too short.

These transducers can be used either with the 6V3100 Engine Timing Indicator Group to indicate No. 1 Cylinder Top Dead Center, or with the 6V3121 Multitach Group to measure rpm.

Caterpillar Information System:

1985/10/01 "Routine" Mid-Life Roll-Ins Of Main And Connecting Rod Bearings No Longer Recommended
1985/10/01 Fuel Transfer Pump Improved
1985/09/01 List Of Service Publications
1985/09/01 New Caterpillar Truck Engine Air Filters (north America)
1985/09/01 Maintenance Management
1985/09/01 Steel Fuel Pump Lifter Used
1985/09/01 Check Fuel Injection Nozzles In Overheated Engines
1985/09/01 New Tools Available To Change Brakesaver Control Valve Diaphragm
1985/09/01 New Engine Pressure Group Available
1985/09/01 New Air-to-air Aftercooler Arrangement Used On Truck Engines
1985/09/01 Inform Caterpillar Dealer Of Major Modifications To Caterpillar Engines And Change In Truck Owners
1985/09/01 Use Correct Valves When Rebuilding Engines
1985/10/01 Maximum Wear Limits Established For Camshaft Roller Followers
1985/10/01 Recommendations For Cooling System And Cold Weather Operation
1985/10/01 New Bleed Screw Used In Fuel Injection Nozzle
1985/10/01 New Keystone Ring Groove Gauge Available
1985/10/01 Fuel Economy Is Often Elusive, But It's Been There All Along
1985/11/01 Two Different Piston Oil Ring Designs Used
1985/11/01 Special Bolts Help Prevent Unauthorized Modification Of Fuel System And Governor Settings
1985/11/01 Comparison Of Fuel Timing Tolerances For Field Settings
1985/11/01 Engine Information Plate Contains More Data; Use Of Performance Specifications
1985/11/01 Check Fuel Injection Replacement Pump Installation
1985/11/01 Effects Of Liner Wear In Engines Using Plasma Coated Top Rings
1985/11/01 Tape Tool Marker Is Available
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.