1985/05/01 Caterpillar


Check For Interference Between Water Temperature Regulator And Cylinder Head Bore

Usage:


3306 Truck Engines

Reports indicate that some 3306 Truck Engines with 7N208 Water Temperature Regulators have experienced overcooling or cooling system pressure surges. In many cases this problem is caused by interference between the water temperature regulator guide tabs and the bore in the cylinder head. Interference occurs when the guide tabs are bent outward. When the guide tabs are bent slightly inward, there is no chance of the interference between the tabs and the cylinder head.


Location of guide tabs on 7N208 Water Temperature Regulator.

Caterpillar Information System:

1985/04/01 Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure
1985/04/01 Changes To Exhaust Manifolds Help Prevent Broken Studs
1985/04/01 New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01 Hardened Spacers Help Keep Bolts Tight
1985/04/01 Use Of Fuel Injection Timing Information In The "Fuel Setting And Related Information" Microfiche
1985/04/01 Changes To Naturally Aspirated Truck Engines For 1985
1985/04/01 Changes To Turbocharged Truck Engines For 1985
1985/03/01 What Cost Failure
1985/03/01 Installation Of Heli-Coils In Holes With Damaged Threads
1985/03/01 List of Service Publications
1985/03/01 Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced
1985/03/01 A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures " Is Available
1985/05/01 Be Sure Correct Piston Rings Are Used On 3400 Series Engines
1985/05/01 Visual Inspection Can Detect Chrome Plated Engine Valves
1985/05/01 Information For Ordering Kpa Or Dual Scale Gauges
1985/05/01 New Bearing Housings Available For Turbochargers
1985/05/01 Constant Torque Hose Clamps Available For General Use
1985/05/01 3406 Engine Overhaul Specials
1985/05/01 Remanufactured Fuel Ratio Controls Are Available In U.s. And Canada
1985/05/01 Installing New Copper Bonded Bearings Can Extend Engine Life
1985/06/01 Inspection And Installation Procedures For Water Pump Shaft And Seals
1985/06/01 New Oil Seal And Coolant Seal Group Improve Service Engine Water Pump
1985/06/01 Preventing Skin Irritation From Petroleum Test Fluids
1985/06/01 Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.