1985/03/01 Caterpillar


A New Book "Analyzing Diesel And Natural Gas Engine Valve Failures " Is Available

Usage:


This new book "Analyzing Diesel And Natural Gas Engine Valve Failures, " Form SEBD0668, will help identify certain valve failures that may occur in Caterpillar engines. A valve failure in a diesel or natural gas engine usually has serious consequences. Merely replacing a damaged valve with a new valve is not a complete solution. The cause of the damage should also be determined and then corrected.

Since every situation is complex and unique, it is almost impossible for one book to cover all the different failures that can be encountered. This book explains and illustrates common failure patterns. It also outlines preventive steps that can be taken to prevent future failures.

This book can prove to be a valuable tool for all engine servicemen. "Analyzing Diesel And Natural Gas Engine Valve Failures" Form SEBD0668, can be obtained through normal literature ordering channels.

Caterpillar Information System:

1985/03/01 3208 Truck Engine Service Manual Available In Spanish
1985/03/01 New Service Manual Binders Are Made From Thicker Material
1985/03/01 New Crankshaft Seal Groups Used
1985/03/01 Dowtherm 209 Full-Fill Coolant
1985/03/01 New Service Tools Available
1985/03/01 Cross Link Between Fuel Racks Has Smoother Surface
1985/03/01 Do Not Weld On Painted Surfaces
1985/03/01 3406B Truck Engines Have Been Improved For 1985
1985/02/01 Over Fueling Spring No Longer Used In Governor
1985/02/01 Correct Service Information For Air Fuel Ratio Controls Is Available In The Latest Service Manual
1985/02/01 Use Care When Removing Oil Pan And 9N3167 Plate
1985/02/01 Install Crankshaft Thrust Bearings Correctly To Avoid Damage
1985/03/01 Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced
1985/03/01 List of Service Publications
1985/03/01 Installation Of Heli-Coils In Holes With Damaged Threads
1985/03/01 What Cost Failure
1985/04/01 Changes To Turbocharged Truck Engines For 1985
1985/04/01 Changes To Naturally Aspirated Truck Engines For 1985
1985/04/01 Use Of Fuel Injection Timing Information In The "Fuel Setting And Related Information" Microfiche
1985/04/01 Hardened Spacers Help Keep Bolts Tight
1985/04/01 New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles
1985/04/01 Changes To Exhaust Manifolds Help Prevent Broken Studs
1985/04/01 Check Cylinder Block And Head Flatness Whenever There Is A Head Gasket Failure
1985/05/01 Check For Interference Between Water Temperature Regulator And Cylinder Head Bore
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.