1985/02/01 Caterpillar


Use Care When Removing Oil Pan And 9N3167 Plate

Usage:


3406B Truck Engines

SUPPLEMENT: 05/00/86

TRUCK ENGINE NEWS, FEBRUARY 1985, PAGE 4 "Use Care When Removing Oil Pan And 9N3167 Plate".

Put a mark through this article and make a reference to the article with the same title in this issue.

--------------- END SUPPLEMENT ---------------

Some OEM's (Original Equipment Manufacturers) now have a truck model with a setback front axle. On these trucks a 9N3167 Plate is used between the oil pan and the cylinder block. A gasket must be used between the 9N3167 Plate and the cylinder block. This plate is held in place by additional bolts that are separate from the oil pan. The 9N3167 Plate weighs approximately 31 kg (68 lb). Because of the weight of this plate, use care when removing the plate.

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.