1984/12/17 Caterpillar


New Pressure Gauges Have Dual Scales [kPa (psi)]

Usage:


All Caterpillar Products

SUPPLEMENT: 050185

TRUCK ENGNINE NEWS, DECEMBER 17, 1984, PAGE 3. In the article, "New Pressure Gauges Have Dual Scales [kPa (psi)]", put a mark through the last paragraph. The correct last paragraph follows:

Dealers can have 2 1/2" gauges recalibrated for a fee of $8.50 plus shipping. Dealers can have 2 1/2" single scale gauges (kPa only) recalibrated and converted to dual scale gauges for $11.00 plus shipping. Send a purchase order to Carrier-Oehler along with the gauge. Conversions can be done when gauges are sent in for repair or calibration.

--------------- END SUPPLEMENT ---------------

New dual scale, fluid filled pressure gauges are available. The outside scale of the dial face is pounds per square inch (psi). The inside scale is kilopascals (kPa). A yellow band on the dial face identifies the kPa scale. The gauges are 63.5 mm (2.50 ") diameter and the case is made of brass. The gauges have ASA Grade A accuracy. All gauges have 1/4-18 NPTF connections. The chart gives the part numbers for the new dual scale gauges.

Repair Information

Repair is available in the United States from:

Carrier-Oehler Company
1695 Vincennes Avenue
P.O. Box 40
South Holland, Illinois 60473

Repair services are available worldwide through Wika offices.

Dealers can convert single scale gauges (kPa only) to dual scale gauges for a fee of $8.50 plus shipping. Send a purchase order to Oehler along with the gauge. Conversion can be done at any time or when gauges are sent in for repair or calibration.

Caterpillar Information System:

1984/12/17 Thread Identification Kit Available
1984/12/17 Starters That Remain Engaged After Engine Is Running
1984/12/17 Causes And Correction Of Opposite Crankshaft Rotation In Direct Injection Engines
1984/12/17 Remanufactured Cylinder Head Groups
1984/12/17 Identification Of Camshaft Groups And Valve Mechanism Groups
1984/11/07 New Diaphragm Used In BrakeSaver Control Valve Group
1984/11/07 New High Alloy Material Is Used In Cylinder Head Assemblies
1984/11/07 Cetane Injection Group Uses New Orifice, Tee and Seals
1984/11/07 New Water Temperature Regulator Has Higher Temperature Setting
1984/11/07 Temperature Adapter Group Can Be Used With A Caterpillar Multimeter
1984/11/07 New Oil Filter Group Can Be Used To Extend Oil Change Interval
1984/11/07 New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used
1984/12/17 Bonnet Of Fuel Injection Pump Group Now Serviced Separately
1984/12/17 Important Differences In Engine Arrangements On 3208 Engines Equipped With Turbochargers
1984/12/17 Remanufactured Turbocharger Groups
1985/01/01 Minimize Fuel Problems In Cold Weather Operation
1985/01/01 Governor Flyweight Shield No Longer Used In New Scroll Fuel Systems
1985/01/01 New Truck Battery Is Available
1985/01/01 New Rear Crankshaft Seal Has Longer Service Life
1985/01/01 Contact Warranty Manager For Vibration Complaints On Western Star Trucks
1985/01/01 New And Improved Gaskets In Front Housing Group And Accessory Drive Group
1985/01/01 Remanufactured Air Fuel Ratio Controls (U.S. And Canada)
1985/01/01 New Tools Available To Service Fuel Injection Nozzles And Adapters
1985/01/01 Valve Lash Adjustment Not A Warranty Item
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.