New Service Tools Available
Usage:
The chart shows new tools available from Caterpillar. More detailed information is given in the Tool Announcement for each tool. The Tool Announcements have been distributed and a copy should be filed in the Tool Guide.
Some tools have a Special Instruction that shows how to use the tool. If available, the Special Instruction Form Number is shown in the last column of the chart along with the Tool Announcement form number.
See your Caterpillar dealer for additional information about these tools or for drawings of the fabricated tools.
Caterpillar Information System:
1984/09/26 Tune-up Kit And Remanufactured Nozzles Available
1984/09/26 New Fittings Used In Fuel Filter Lines Group
1984/09/26 New Thermistor Thermometer Group Can Be Ordered At Less Cost
1984/09/26 New Inlet Valves Used In Cylinder Heads
1984/09/26 New Main And Connecting Rod Bearings Have Copper Bond Material
1984/09/26 Change To Maintenance Interval For Valve Lash Adjustment
1984/09/26 Surface Grinding Of Compacted Graphite Iron Cylinder Heads
1984/09/26 Improved Cylinder Heads And Valve Covers Used
1984/09/26 Correct Installation Of Fuel Injection Pumps Can Prevent Fuel Leaks
1984/08/06 Installation Instructions For Turbocharger Bearing Kit
1984/08/06 Alternator Available For General Use
1984/08/06 FT1886 Valve Spring Compressor Group Available
1984/09/26 Higher Compression Pistons Can Help Reduce White Exhaust Smoke During Cold Weather Starts
1984/09/26 New Cylinder Block Groups Used
1984/11/07 Foil Shield Will Help Prevent Electrical Interference In Engine Set Point Indicator
1984/11/07 Remove Diode Assemblies From Shutoff Solenoids
1984/11/07 New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used
1984/11/07 New Oil Filter Group Can Be Used To Extend Oil Change Interval
1984/11/07 Temperature Adapter Group Can Be Used With A Caterpillar Multimeter
1984/11/07 New Water Temperature Regulator Has Higher Temperature Setting
1984/11/07 Cetane Injection Group Uses New Orifice, Tee and Seals
1984/11/07 New High Alloy Material Is Used In Cylinder Head Assemblies
1984/11/07 New Diaphragm Used In BrakeSaver Control Valve Group
1984/12/17 Identification Of Camshaft Groups And Valve Mechanism Groups