Tune-up Kit And Remanufactured Nozzles Available
Usage:
All 1100 Series And 3208 Engines
Tune-up kits and remanufactured nozzles are now available for the above engines. The tune-up kits include the parts shown in Chart B, when applicable. The remanufactured nozzles are specifically designed for Caterpillar engines to provide maximum fuel efficiency and performance. The remanufactured nozzles have the same warranty as new nozzles.
The part numbers of the tune-up kits and remanufactured nozzles are shown in Chart A. Use the Numerical Parts Record (NPR) for the model usage of the nozzles and tune-up kits.
Caterpillar Information System:
1984/09/26 New Fittings Used In Fuel Filter Lines Group
1984/09/26 New Thermistor Thermometer Group Can Be Ordered At Less Cost
1984/09/26 New Inlet Valves Used In Cylinder Heads
1984/09/26 New Main And Connecting Rod Bearings Have Copper Bond Material
1984/09/26 Change To Maintenance Interval For Valve Lash Adjustment
1984/09/26 Surface Grinding Of Compacted Graphite Iron Cylinder Heads
1984/09/26 Improved Cylinder Heads And Valve Covers Used
1984/09/26 Correct Installation Of Fuel Injection Pumps Can Prevent Fuel Leaks
1984/08/06 Installation Instructions For Turbocharger Bearing Kit
1984/08/06 Alternator Available For General Use
1984/08/06 FT1886 Valve Spring Compressor Group Available
1984/08/06 List Of Service Publications
1984/09/26 New Service Tools Available
1984/09/26 Higher Compression Pistons Can Help Reduce White Exhaust Smoke During Cold Weather Starts
1984/09/26 New Cylinder Block Groups Used
1984/11/07 Foil Shield Will Help Prevent Electrical Interference In Engine Set Point Indicator
1984/11/07 Remove Diode Assemblies From Shutoff Solenoids
1984/11/07 New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used
1984/11/07 New Oil Filter Group Can Be Used To Extend Oil Change Interval
1984/11/07 Temperature Adapter Group Can Be Used With A Caterpillar Multimeter
1984/11/07 New Water Temperature Regulator Has Higher Temperature Setting
1984/11/07 Cetane Injection Group Uses New Orifice, Tee and Seals
1984/11/07 New High Alloy Material Is Used In Cylinder Head Assemblies
1984/11/07 New Diaphragm Used In BrakeSaver Control Valve Group