New Thermistor Thermometer Group Can Be Ordered At Less Cost
Usage:
Description of Change: A new thermistor thermometer group is available. It is the same as the former group except it is packaged differently. Thus, the new group costs less than the former group.
Adaptable As: The new 8T470 Thermistor Thermometer Group is a direct replacement for the former 9S9102 Thermistor Thermometer Group, which is canceled. See Special Instruction, Form SEHS8446 for the operating instructions of this new group.
Caterpillar Information System:
1984/09/26 New Inlet Valves Used In Cylinder Heads
1984/09/26 New Main And Connecting Rod Bearings Have Copper Bond Material
1984/09/26 Change To Maintenance Interval For Valve Lash Adjustment
1984/09/26 Surface Grinding Of Compacted Graphite Iron Cylinder Heads
1984/09/26 Improved Cylinder Heads And Valve Covers Used
1984/09/26 Correct Installation Of Fuel Injection Pumps Can Prevent Fuel Leaks
1984/08/06 Installation Instructions For Turbocharger Bearing Kit
1984/08/06 Alternator Available For General Use
1984/08/06 FT1886 Valve Spring Compressor Group Available
1984/08/06 List Of Service Publications
1984/08/06 New Disassembly And Assembly Tools Available For Fuel Ratio Controls
1984/08/06 New Relief Valve Guide Used In Oil Pump
1984/09/26 New Fittings Used In Fuel Filter Lines Group
1984/09/26 Tune-up Kit And Remanufactured Nozzles Available
1984/09/26 New Service Tools Available
1984/09/26 Higher Compression Pistons Can Help Reduce White Exhaust Smoke During Cold Weather Starts
1984/09/26 New Cylinder Block Groups Used
1984/11/07 Foil Shield Will Help Prevent Electrical Interference In Engine Set Point Indicator
1984/11/07 Remove Diode Assemblies From Shutoff Solenoids
1984/11/07 New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used
1984/11/07 New Oil Filter Group Can Be Used To Extend Oil Change Interval
1984/11/07 Temperature Adapter Group Can Be Used With A Caterpillar Multimeter
1984/11/07 New Water Temperature Regulator Has Higher Temperature Setting
1984/11/07 Cetane Injection Group Uses New Orifice, Tee and Seals