1984/09/26 Caterpillar


New Inlet Valves Used In Cylinder Heads

Usage:


3400 Series Truck Engines

Description of Change: New inlet valves are used in all 3400 Series Truck Engines. Only the facing material (alloy) on the new valve is different from the former valve. The dimensions of the new and former valves are the same. The new facing material is used to reduce dependence on the cobalt based alloy used on the former valve.

Adaptable As: The new 2W2622 Inlet Valve is a direct replacement for the former 1W3859 Inlet Valve in all 3400 Series Truck Engines. The new 2W2622 Inlet Valve will provide the same service life as the former 1W3859 Inlet Valve.

Caterpillar Information System:

1984/09/26 New Main And Connecting Rod Bearings Have Copper Bond Material
1984/09/26 Change To Maintenance Interval For Valve Lash Adjustment
1984/09/26 Surface Grinding Of Compacted Graphite Iron Cylinder Heads
1984/09/26 Improved Cylinder Heads And Valve Covers Used
1984/09/26 Correct Installation Of Fuel Injection Pumps Can Prevent Fuel Leaks
1984/08/06 Installation Instructions For Turbocharger Bearing Kit
1984/08/06 Alternator Available For General Use
1984/08/06 FT1886 Valve Spring Compressor Group Available
1984/08/06 List Of Service Publications
1984/08/06 New Disassembly And Assembly Tools Available For Fuel Ratio Controls
1984/08/06 New Relief Valve Guide Used In Oil Pump
1984/08/06 Use Caution When Handling Components That Contain Asbestos
1984/09/26 New Thermistor Thermometer Group Can Be Ordered At Less Cost
1984/09/26 New Fittings Used In Fuel Filter Lines Group
1984/09/26 Tune-up Kit And Remanufactured Nozzles Available
1984/09/26 New Service Tools Available
1984/09/26 Higher Compression Pistons Can Help Reduce White Exhaust Smoke During Cold Weather Starts
1984/09/26 New Cylinder Block Groups Used
1984/11/07 Foil Shield Will Help Prevent Electrical Interference In Engine Set Point Indicator
1984/11/07 Remove Diode Assemblies From Shutoff Solenoids
1984/11/07 New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used
1984/11/07 New Oil Filter Group Can Be Used To Extend Oil Change Interval
1984/11/07 Temperature Adapter Group Can Be Used With A Caterpillar Multimeter
1984/11/07 New Water Temperature Regulator Has Higher Temperature Setting
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.