List Of Service Publications
Usage:
This service information has become available since the last list published in Truck Engine News. These forms can be ordered from your Caterpillar dealer to keep reference information current.
Caterpillar Information System:
1984/05/23 New Valve Assembly And Seal Used In Fuel Transfer Pump
1984/05/23 Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1984/04/04 New Aftercooler Hose Clamp Helps Prevent Leaks
1984/04/04 Make Sure There Is Clearance Between Cylinder Head And Fuel Injection Pump Housing When A New Cylinder Head Is Installed
1984/04/04 6V3176 Relief Valve Available For Center Hole Double Acting Hydraulic Cylinders
1984/04/04 Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines
1984/04/04 Remanufactured Undersize Crankshafts Are Available
1984/04/04 Service Tools With Dual Scale (U.S. Standard And Metric) Will Again Be Available
1984/04/04 6V7925 Fuel Rate Indicator Is Available
1984/04/04 Information For Ordering FLEX-HONES And Grit Sizes For Reconditioning Cylinder Liners Or Cylinder Block Bores
1984/04/04 List of Service Publications
1984/04/04 New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position
1984/05/23 Borescope And Light Source Available For Internal Inspection Of Passages On Most Caterpillar Products
1984/05/23 New Recommendation For Oil Hole Location During Installation Of Camshaft Bearings
1984/05/23 New Seal For Fuel Injection Pump Housing Is More Resistant To Heat Damage
1984/05/23 New Oil Filter Base Assembly Used In Filter Base Group
1984/05/23 Remanufactured Oil Pumps Available
1984/05/23 Improved Cylinder Head Gasket
1984/05/23 High Levels Of Soot In The Oil; Make Sure Air Fuel Ratio Control Operates Correctly
1984/05/23 3406 Remanufactured Truck Engines Available
1984/06/27 New Cylinder Head Has Larger Mounting Holes For The Lifting Brackets
1984/06/27 Valve Springs Must Be Removed Before Fuel Injection Nozzle Adapter Assembly Is Removed
1984/06/27 New Adapter Assemblies And Clamps Hold Fuel Nozzles In Position
1984/06/27 New Ammeter And Ammeter Calibrator Group Available