Parts Service Engine Information Plate Available
Usage:
All Truck Engines That Use 9L6531 Information Plate
A new engine information plate is available for use when arrangements are changed. The plate has blank spaces for engine specifications. It must be installed on top of the old plate to let the original serial number show.
The new 4W5140 Plate must be used with the 9L6531 Plate to change engine information when the arrangement is changed.
INSTALLATION:Remove the lower 7.5 mm (.300 ") of the plate along the mark. Completely clean the old plate and install the new plate on the former using 5P3429 Adhesive so the arrangement number block on the new plate is directly over the arrangement number block on the former plate. This will permit the serial number to show
Caterpillar Information System:
1984/02/15 List Of Service Publications
1984/02/15 Several Temperature Detectors Available For 6V6996 And 6V7118 Induction Bearing Heaters
1984/02/15 3406B Truck Engines Available
1984/02/15 Parts Service Information For Pistons
1984/02/15 Remanufactured Cylinder Head Assemblies
1984/02/15 New Service Tools Available
1984/02/15 Some Crankshafts Must Be Tufftride Hardened After A Regrind
1984/02/15 Procedure To Remove Sharp Edges From Fuel Racks
1984/02/15 Remanufactured Connecting Rod Assemblies
1984/02/15 New Cylinder Head Assembly Made With A Different Material
1984/02/15 New Service Center For 6V2192 Injection Transducer
1984/02/15 Correct Wiring And Fuse Must Be Used For Correct Operation Of Shut-Off Solenoid Group
1984/04/04 New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position
1984/04/04 List of Service Publications
1984/04/04 Information For Ordering FLEX-HONES And Grit Sizes For Reconditioning Cylinder Liners Or Cylinder Block Bores
1984/04/04 6V7925 Fuel Rate Indicator Is Available
1984/04/04 Service Tools With Dual Scale (U.S. Standard And Metric) Will Again Be Available
1984/04/04 Remanufactured Undersize Crankshafts Are Available
1984/04/04 Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines
1984/04/04 6V3176 Relief Valve Available For Center Hole Double Acting Hydraulic Cylinders
1984/04/04 Make Sure There Is Clearance Between Cylinder Head And Fuel Injection Pump Housing When A New Cylinder Head Is Installed
1984/04/04 New Aftercooler Hose Clamp Helps Prevent Leaks
1984/05/23 Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads
1984/05/23 New Valve Assembly And Seal Used In Fuel Transfer Pump