1984/02/15 Caterpillar

Remanufactured Cylinder Head Assemblies

Usage:

3208 Naturally Aspirated Truck Engines

SUPPLEMENT: 12/17/84

TRUCK ENGINE NEWS, FEBRUARY 15, 1984. The article "Remanufactured Cylinder Head Assemblies," does not have complete information. Put a mark through that article and make reference to the article with a similiar title in this issue.

--------------- END SUPPLEMENT ---------------

Remanufactured cylinder head assemblies are now available for the above engines. These remanufactured cylinder head assemblies include the complete valve mechanism. Only cylinder heads which are components of the standard groups shown in the chart can be returned as cores. Cylinder heads with cracks can be sent as cores, but all cylinder heads must have the valve mechanisms still assembled. Remanufactured cylinder head assemblies have the same warranty as new cylinder head assemblies.

Caterpillar Information System:

1984/02/15 New Service Tools Available

1984/02/15 Some Crankshafts Must Be Tufftride Hardened After A Regrind

1984/02/15 Procedure To Remove Sharp Edges From Fuel Racks

1984/02/15 Remanufactured Connecting Rod Assemblies

1984/02/15 New Cylinder Head Assembly Made With A Different Material

1984/02/15 New Service Center For 6V2192 Injection Transducer

1984/02/15 Correct Wiring And Fuse Must Be Used For Correct Operation Of Shut-Off Solenoid Group

1984/02/15 New Plastic Impeller Will Help Improve Service Life Of Water Pump Seal

1984/02/15 Fuel System Manual Bleed Valve Removed; Drain Lines Group Added

1984/02/15 New Water Temperature Regulator Helps Prevent Engine Overcooling

1983/12/21 Replacement Valve Guides Can Be Used To Recondition Cylinder Heads

1983/12/21 FT1808 Cable Permits Easier Use Of 6V2100 Multitach To Check Engine Or Alternator RPM

1984/02/15 Parts Service Information For Pistons

1984/02/15 3406B Truck Engines Available

1984/02/15 Several Temperature Detectors Available For 6V6996 And 6V7118 Induction Bearing Heaters

1984/02/15 List Of Service Publications

1984/04/04 Parts Service Engine Information Plate Available

1984/04/04 New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position

1984/04/04 List of Service Publications

1984/04/04 Information For Ordering FLEX-HONES And Grit Sizes For Reconditioning Cylinder Liners Or Cylinder Block Bores

1984/04/04 6V7925 Fuel Rate Indicator Is Available

1984/04/04 Service Tools With Dual Scale (U.S. Standard And Metric) Will Again Be Available

1984/04/04 Remanufactured Undersize Crankshafts Are Available

1984/04/04 Fuel Setting And Air Fuel Ratio Control Adjustment Tools For 3406B Engines