1984/02/15 Caterpillar


New Service Tools Available

Usage:


The chart shows new tools available from Caterpillar. More detailed information is given in the Tool Announcement for each tool. The Tool Announcements have been distributed and a copy should be filed in the Tool Guide.

Some tools have a Special Instruction that shows how to use the tool. If available, the Special Instruction Form Number is shown in the last column of the chart along with the Tool Announcement form number.

See your Caterpillar dealer for additional information about these tools or for drawings of the Fabricated Tools.

Caterpillar Information System:

1984/02/15 Some Crankshafts Must Be Tufftride Hardened After A Regrind
1984/02/15 Procedure To Remove Sharp Edges From Fuel Racks
1984/02/15 Remanufactured Connecting Rod Assemblies
1984/02/15 New Cylinder Head Assembly Made With A Different Material
1984/02/15 New Service Center For 6V2192 Injection Transducer
1984/02/15 Correct Wiring And Fuse Must Be Used For Correct Operation Of Shut-Off Solenoid Group
1984/02/15 New Plastic Impeller Will Help Improve Service Life Of Water Pump Seal
1984/02/15 Fuel System Manual Bleed Valve Removed; Drain Lines Group Added
1984/02/15 New Water Temperature Regulator Helps Prevent Engine Overcooling
1983/12/21 Replacement Valve Guides Can Be Used To Recondition Cylinder Heads
1983/12/21 FT1808 Cable Permits Easier Use Of 6V2100 Multitach To Check Engine Or Alternator RPM
1983/12/21 Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block
1984/02/15 Remanufactured Cylinder Head Assemblies
1984/02/15 Parts Service Information For Pistons
1984/02/15 3406B Truck Engines Available
1984/02/15 Several Temperature Detectors Available For 6V6996 And 6V7118 Induction Bearing Heaters
1984/02/15 List Of Service Publications
1984/04/04 Parts Service Engine Information Plate Available
1984/04/04 New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position
1984/04/04 List of Service Publications
1984/04/04 Information For Ordering FLEX-HONES And Grit Sizes For Reconditioning Cylinder Liners Or Cylinder Block Bores
1984/04/04 6V7925 Fuel Rate Indicator Is Available
1984/04/04 Service Tools With Dual Scale (U.S. Standard And Metric) Will Again Be Available
1984/04/04 Remanufactured Undersize Crankshafts Are Available
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.