Remanufactured Connecting Rod Assemblies
Usage:
1100 Series and 3208, 3306, 3406, 3408 Truck Engines
Remanufactured connecting rod assemblies are available for the above engines. These rod assemblies include the bolts, nuts, and piston pin bearing. The remanufactured connecting rod assemblies are made to the latest design changes and have the same warranty as new rod assemblies. Remember a rod assembly must be returned as a core when a remanufactured rod assembly is ordered.
These remanufactured rod assemblies are only available in the United States, Canada and Australia.
Caterpillar Information System:
1984/02/15 New Cylinder Head Assembly Made With A Different Material
1984/02/15 New Service Center For 6V2192 Injection Transducer
1984/02/15 Correct Wiring And Fuse Must Be Used For Correct Operation Of Shut-Off Solenoid Group
1984/02/15 New Plastic Impeller Will Help Improve Service Life Of Water Pump Seal
1984/02/15 Fuel System Manual Bleed Valve Removed; Drain Lines Group Added
1984/02/15 New Water Temperature Regulator Helps Prevent Engine Overcooling
1983/12/21 Replacement Valve Guides Can Be Used To Recondition Cylinder Heads
1983/12/21 FT1808 Cable Permits Easier Use Of 6V2100 Multitach To Check Engine Or Alternator RPM
1983/12/21 Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block
1983/12/21 Use Correct Serial Number For Remanufactured Engines
1983/12/21 Water Pump Housing Is Now Available For Parts Service
1983/12/21 Cooling System Conditioner Helps Prevent Cavitation Damage
1984/02/15 Procedure To Remove Sharp Edges From Fuel Racks
1984/02/15 Some Crankshafts Must Be Tufftride Hardened After A Regrind
1984/02/15 New Service Tools Available
1984/02/15 Remanufactured Cylinder Head Assemblies
1984/02/15 Parts Service Information For Pistons
1984/02/15 3406B Truck Engines Available
1984/02/15 Several Temperature Detectors Available For 6V6996 And 6V7118 Induction Bearing Heaters
1984/02/15 List Of Service Publications
1984/04/04 Parts Service Engine Information Plate Available
1984/04/04 New Adapter Assemblies And Clamps Used To Hold Fuel Nozzles In Position
1984/04/04 List of Service Publications
1984/04/04 Information For Ordering FLEX-HONES And Grit Sizes For Reconditioning Cylinder Liners Or Cylinder Block Bores