Water Pump Housing Is Now Available For Parts Service
Usage:
All 3208 Truck Engines
Description of Change: The water pump housing on the above engines is available for parts service. With the availability of this housing, it is now possible to replace only a housing if it is damaged. Formerly, the housing was not available for parts service by itself and a complete water pump group had to be ordered.
Adaptable To: The 9N3076 Housing is adaptable to all the above engines.
Caterpillar Information System:
1983/12/21 Cooling System Conditioner Helps Prevent Cavitation Damage
1983/12/21 Mixture Of Inch And Metric Fasteners To Be Used
1983/12/21 6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1983/12/21 Correct Installation Of New Valve Springs
1983/12/21 Crankshaft Failures
1983/12/21 Reuse Of Engine Bearings
1983/12/21 Service Information For Balancers And Dampers
1983/11/23 New Connecting Rod And Main Bearings Used
1983/11/23 Broken Edge Filter Or Plugged Cylinder Head Adapter Can Cause Rough Engine Operation Or Low Power
1983/11/23 List Of Service Publications
1983/11/23 New Service Centers For 6V3100 Engine Timing Indicator Group
1983/11/23 Maintenance Free Battery Available For Use In On-Highway Trucks And Buses
1983/12/21 Use Correct Serial Number For Remanufactured Engines
1983/12/21 Sleeve Can Be Used For Reconditioning The Mounting Bore For The Fuel Pump Housing In The Cylinder Block
1983/12/21 FT1808 Cable Permits Easier Use Of 6V2100 Multitach To Check Engine Or Alternator RPM
1983/12/21 Replacement Valve Guides Can Be Used To Recondition Cylinder Heads
1984/02/15 New Water Temperature Regulator Helps Prevent Engine Overcooling
1984/02/15 Fuel System Manual Bleed Valve Removed; Drain Lines Group Added
1984/02/15 New Plastic Impeller Will Help Improve Service Life Of Water Pump Seal
1984/02/15 Correct Wiring And Fuse Must Be Used For Correct Operation Of Shut-Off Solenoid Group
1984/02/15 New Service Center For 6V2192 Injection Transducer
1984/02/15 New Cylinder Head Assembly Made With A Different Material
1984/02/15 Remanufactured Connecting Rod Assemblies
1984/02/15 Procedure To Remove Sharp Edges From Fuel Racks