1983/11/23 Caterpillar


New Service Centers For 6V3100 Engine Timing Indicator Group

Usage:


Snap-on Tools Corporation has opened a new Midwest service center and their existing Canadian service center has been equipped to service the 6V3100 Engine Timing Indicator Group. The addresses for these service centers are:

Midwest Service Center address:

Snap-on Tools Corporation
Midwest Service Center
2300 Commerce
New Berlin, Wisconsin 53151
U.S.A.
Telephone: (414) 785-9996

Canadian service center mailing address:

Snap-on Tool Corporation Of Canada, LTD
Repair Center
P. 0. Box 8271
Concord, Ontario, Canada
L4K-1E4
Telephone: (416) 669-9501

Canadian service center shipping address:

Snap-on Tools Corporation Of Canada, LTD.
Repair Center
Attention: Manager
8271 Keele Street
Vaughn Township
Concord, Ontario, Canada

Caterpillar Information System:

1983/11/23 Maintenance Free Battery Available For Use In On-Highway Trucks And Buses
1983/11/23 New Valve Lifter Assemblies Used In Valve Mechanism Groups
1983/11/23 Use 6V6070 Tool Group And New Adjustment Procedure For New Scroll Fuel System
1983/11/23 New Water Temperature Regulator Has Higher Setting For Cold Weather Operation
1983/11/23 Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures
1983/11/23 Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/10/05 List Of Service Publications
1983/10/05 Use 6V6070 Tool Group And New Adjustment Procedure For New Scroll Fuel System
1983/10/05 Parts Service Information For Pistons, Connecting Rods, Piston Pins And Rings
1983/10/05 New Piston Oil Rings
1983/10/05 Oil Shield And Rotocoil Must Be Installed Together For Acceptable Oil Control
1983/10/05 6V3100 Engine Timing Indicator Group May Have 6V7910 Or 6V2192 Transducer
1983/11/23 List Of Service Publications
1983/11/23 Broken Edge Filter Or Plugged Cylinder Head Adapter Can Cause Rough Engine Operation Or Low Power
1983/11/23 New Connecting Rod And Main Bearings Used
1983/12/21 Service Information For Balancers And Dampers
1983/12/21 Reuse Of Engine Bearings
1983/12/21 Crankshaft Failures
1983/12/21 Correct Installation Of New Valve Springs
1983/12/21 6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1983/12/21 Mixture Of Inch And Metric Fasteners To Be Used
1983/12/21 Cooling System Conditioner Helps Prevent Cavitation Damage
1983/12/21 Water Pump Housing Is Now Available For Parts Service
1983/12/21 Use Correct Serial Number For Remanufactured Engines
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.