1983/08/31 Caterpillar


New Governor Drive Gears And Weight Assemblies

Usage:


1676 Truck Engines

Description of Change: A new spindle assembly and weight assembly are now used in the governor drive groups on the above engines. The new gears in these assemblies are hardened to permit a longer service life. The number of teeth and the pitch of the new gears are different, so that they can not be used with the former gears. The former gears were not hardened.

Adaptable As: The new 8N9355 Spindle Assembly and 1W1132 Weight Assembly are direct replacements for the former 3S8590 Spindle Assembly and 2N478 Weight Assembly. The former parts are canceled.

Caterpillar Information System:

1983/08/31 New Procedure And New Tool Can Be Used To Remove Cylinder Sleeves From The Cylinder Block
1983/08/31 New Liner Seat Insert Available
1983/08/31 List Of Service Publications
1983/08/31 New Fuel Ratio Control Group Has Improved Diaphragm
1983/08/31 New Filter Orifice Helps Prevent Governor Surge
1983/06/29 New Reconditioning Specifications For Cylinders Decrease Piston Scuffing And Seizure
1983/06/29 New Camshaft Gear Has More Resistance To Pitting
1983/06/29 Change 6V3060 Egr Testers To Les Testers
1983/06/29 Pistons With Thicker Top Rings Must Be Used In Correct Applications
1983/06/29 New Piston Ring Group Used
1983/06/29 Damaged Lifter Bores In 3400 Series Engines Can Be Used Again
1983/06/29 6V7100 Combustible Gas Leak Detector And 6V7103 Calibration Kit Available
1983/08/31 New 6V7070 And 6V7800 Digital Multimeters Available
1983/08/31 Use A Pipe Plug For Repairs of Small Holes In Castings
1983/08/31 Information For Repair Of Hydraulic Fuel Ratio Controls
1983/08/31 Troubleshooting Engine Vibration; Damper Adapter Can Be Changed
1983/08/31 Recommendations For Use Of 6V6125 Infrared Thermometer
1983/08/31 Reference Chart For Truck Engine News Articles On Improvements To 3306 Truck Engines
1983/10/05 Vent Hole In Water Temperature Regulator Cover Removed
1983/10/05 Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage
1983/10/05 Repair Of Damaged Threads
1983/10/05 6V3100 Engine Timing Indicator Group May Have 6V7910 Or 6V2192 Transducer
1983/10/05 Oil Shield And Rotocoil Must Be Installed Together For Acceptable Oil Control
1983/10/05 New Piston Oil Rings
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.